RTLED2X4/MVS/E

Description

Compliance
UL Listed	Suitable for damp locations
IESNA LM-79 & LM-80 Testing	RAB LED luminaires have been tested by an independent laboratory in accordance with IESNAlm-79 andlm-80
DLC Listed	This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-QOHE9L
Electrical
Driver	35W: Class 2, Constant Current, 120-277V, 50/60 Hz, 120V: 0.30A, 208V: 0.17A, 240V: 0.15A, 277V: 0.13A30W: Class 2, Constant Current, 120-277V, 50/60 Hz, 120V: 0.25A, 208V: 0.15A, 240V: 0.13A, 277V: 0.12A25W: Class 2, Constant Current, 120-277V, 50/60 Hz, 120V: 0.21A, 208V: 0.12A, 240V: 0.10A, 277V: 0.10A
Dimming Driver	Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD	2.87% at 120V, 3.07% at 277V
Power Factor	99.74% at 120V, 96.42% at 277V
Battery Backup	Battery backup will operate the fixture for 90 minutes if power fails. Wired for 120.
Surge Protection	2.5kV
Construction
Housing	Steel sheet metal
Cold Weather Starting	The minimum starting temperature is 0°C (32°F)
Ambient Temperature	Suitable for use in up to 40°C (104°F)
Reflector	High-reflectance, powder-coated finish, optimized for uniform light distribution
Lens	Polycarbonate lens
Finish	Formulated for high durability and long-lasting color
Green Technology	Mercury and UV free. RoHS-compliant components.
LED Characteristics
LEDs	Long-life, high-efficacy, surface-mount LEDs
Color Stability	LED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period
Color Uniformity	RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Installation
Mounting	Retrofits into the existing housing
Performance
Lifespan	100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Sensor Settings
Capacitance Load	400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC
Operating Temperature	-20°C to +60°C (-4°F to +140°F)
Relay	Zero-cross relay
Maximum Mounting Height	16.4 ft
Customizable Detection Area	10, 50, 75 or 100%
Time Delay	5s, 30s, 1min, 5min, 10min, 20min, 30min
Cut Off Period	0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Cut-Off Dimming level	10, 20, 30, 50%
Cut-Off Power	Less than 1W
Daylight Threshold	Disable/400Lux/350Lux/300Lux/250Lux/200Lux/120Lux/ 80Lux/50Lux/30Lux/10Lux/2Lux
Sensor Principle	High Frequency
Microwave Frequency	5.8GHz +/- 75MHz
Microwave Power	<0.3mW
Max Detection Range	26 ft diameter at 16 ft mounting height
Detection Angle	About 30 to 150 degrees
Remote Control Accessory	Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here.

RTLED2X4/MVS/E