SWISHFA2X4/D10/MVS

SWISHFA2X4/D10/MVS

RAB Lighting

$243.00
(No reviews yet) Write a Review
SKU:
SWISHFA2X4/D10/MVS
UPC:
19813509723
Availability:
Usually ships within 1 week.
Weight:
25.50 LBS
Shipping:
Calculated at Checkout
Spec Sheet:
Spec Sheet
Instructions:
Instructions
Watts:
39W
Color Temp:
Field Adjustable
Lumens:
3484-5882 lm
Efficacy:
119-143.6 lm/W
Color Accuracy:
83-85 CRI
L70:
100,000 Hours
Type:
Constant Current
V120:
0.33A
V208:
0.20A
V240:
0.17A
V277:
0.15A
Input Watts:
25.6-47.9W
Spec Sheet:
Spec Sheet
Instructions:
Instructions
Watts:
39W
Color Temp:
Field Adjustable
Lumens:
3484-5882 lm
Efficacy:
119-143.6 lm/W
Color Accuracy:
83-85 CRI
L70:
100,000 Hours
Type:
Constant Current
V120:
0.33A
V208:
0.20A
V240:
0.17A
V277:
0.15A
Input Watts:
25.6-47.9W
Adding to cart… The item has been added
Field Adjustability
Field AdjustableField Adjustable Light Output: 2' x 4': 49W/39W/29W (factory default 39W)Color temperature selectable by 3500K, 4000K and 5000K (factory default 4000K)
Compliance
UL ListedSuitable for damp locations
IESNA LM-79 & LM-80 TestingRAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
Trade Agreements Act CompliantThis product is a product of Cambodia and a "designated country" end product that complies with the Trade Agreements Act
DLC ListedThis product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: P7UHVBI0
Electrical
DriverClass 2, Constant Current, 120-277V, 50/60 Hz, 120V: 0.37A, 208V: 0.19A, 240V: 0.17A, 277V: 0.15A
Dimming DriverDriver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD8.75% at 120V, 7.53% at 277V
Power Factor99.4% at 120V, 95.8% at 277V
Surge Protection2kV
Construction
Cold Weather StartingThe minimum starting temperature is -20°C (-4°F)
Ambient TemperatureSuitable for use in up to 40°C (104°F)
IC RatedSuitable for direct contact with insulation
HousingDie-formed, 20-gauge, cold-rolled steel
ReflectorIntegral reflector (on the sides) with high reflectance finish, optimized for uniform distribution.
LensFrosted polycarbonate
FinishFormulated for high durability and long-lasting color
Green TechnologyMercury and UV free. RoHS-compliant components.
Installation
MountingRecessed ceiling
LED Characteristics
LEDsLong-life, high-efficacy, surface-mount LEDs
Color StabilityLED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period
Color UniformityRAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Performance
Lifespan100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Sensor Settings
Capacitance Load400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC
Operating Temperature-20°C to +60°C (-4°F to +140°F)
RelayZero-cross relay
Maximum Mounting Height16.4 ft
Customizable Detection Area10, 50, 75 or 100%
Time Delay5s, 30s, 1min, 5min, 10min, 20min, 30min
Cut Off Period0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Cut-Off Dimming level10, 20, 30, 50%
Cut-Off PowerLess than 1W
Daylight ThresholdAbout .2-5 fc for disabled
Sensor PrincipleHigh Frequency
Microwave Frequency5.8GHz +/- 75MHz
Microwave Power<0.2mW
Max Detection Range26 ft diameter at 16 ft mounting height
Detection AngleAbout 30 to 150 degrees
Remote Control AccessoryAdjust settings using remote control (catalog# MVSREM). Only available with 0-10V dimming driver options. Remote control available here.

Reviews

!