RAB Lighting LCBA19-10-E26-9TW-SS-NS-2P-1 2PK LC BLUE A19 10W SMARTSHIFT NATURAL SPECTRUM WITH SS NANO LAMPS

Description

Performance
Product Type	SmartShift Starter Kit
Description	No Gateway or Hub required. These lamps can be wirelessly controlled via the mobile app for On/Off, Dimming, Color Temperature, Scenes, Schedules and SmartShift. Connect to Amazon Alexa or Google home for voice control and remote access.
Wattage Equivalency	60W Incandescent
Input Wattage	10W
Lumens	800lm
Lightcloud
Lightcloud Blue	Lightcloud Blue is a Bluetooth Mesh wireless lighting control system that allows you to control RAB's various compatible devices. With RAB's patented Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system's reach.DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)Learn more at www.lightcloud.com.
Gateway Required	No
Communication Protocol	Bluetooth Mesh
SmartShift	SmartShift is the most advanced - yet easiest to use - circadian lighting system, which syncs white color tuning with the local sunrise and sunset.
Range	Lightcloud: Lightcloud: Up to 100 ft between standard building materials; Up to 1,000 ft clear line of sight.Lightcloud Blue: Lightcloud Blue: Up to 60 ft between standard building materials; Up to 200 ft clear line of sight.
Spacing Criteria	Lightcloud Blue devices should be placed within the specified range to communicate within the Bluetooth Mesh network.
Max # of Devices to Control	The Nano can manage a maximum of up to 600 Lightcloud Blue devices or up to 16 Areas. Maximum of 1 Nano per Site.
Factory Reset	Method 1: Delete from App (A19 lamps & Nano) Open the app and access the device settings for the paired device. Be sure that the device is online and select 'Delete'. The device will flash on/off 5 times and return to full brightness. Method 2a: Manual (Nano only) Press and hold the center button on the Nano for 10 seconds. A flashing red light will appear to indicate the Nano has been reset and then revert to a flashing blue light indicating the Nano is ready to pair to the App. Method 2b: Manual (A19 lamps only) Power the lamp off and on 5+ times consecutively. Do not allow less than 1 second and no more than 3 seconds to elapse between switching. The lamp will flash 3x, then reset to 100% brightness at default CCT. Method 3: Rapid Reset Tool (A19 lamps only) The Rapid Reset process must be done by professional electricians qualified by RAB. Reach out to your RAB sales manager to request a Rapid Reset Tool. The tool simply needs to be placed directly on the base of the lamp near the black Lightcloud Blue logo for 2 seconds or until the lamp begins to flash 3 times, then it will reset to 100% brightness at default CCT.
Button Controls	Available once Nano has been provisioned. Press the button 1x and release to turn all lights On/Off within the Site. Press the button 2x and release to change the color temperature of all color tuning lighting within the Site.
Status Indicator	The button on the Nano includes an indicator light which displays various colors depending on the current status. Solid Blue - Nano is paired to the Lightcloud Blue app Flashing Blue - Nano is ready to be paired to the Lightcloud Blue app Solid Green - Nano has successfully established a Wi-Fi connection FLashing Red - Nano has been restored to default factory settings Flashing Yellow - Nano is searching for a Wi-Fi network to connect to
Voice Control	Available once Nano has been provisioned and connected to a 2.4 GhZ Wi-Fi network. Link to Amazon Alexa or Google Home.
Remote Access	Available once Nano has been provisioned and connected to a 2.4 GhZ Wi-Fi network. Link to Amazon Alexa or Google Home.
Electrical
Power Factor	≥0.9
Dimmable	Yes, via the Lightcloud Blue mobile app and devices.These lamps will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
Input Voltage	120V
Operating Frequency	60 Hz
Input Current @ 120V (mA)	90mA
Operating Temperature	-4°F to 104°F (-20°C to 40°C)
Flicker	≤5%
LED Characteristics
Beam Angle	230°
Color Temperature	Tunable White via Lightcloud Blue mobile app 2700K - 6500K
Color Accuracy (CRI)	>95 CRI
Natural Spectrum	Low blue LEDs deliver a spectrum of light similar to that of natural Sunlight. They beautifully render colors with greater than 95+ CRI and an R9 value greater than 90. In addition, these LEDs don't suppress melatonin creation which aids in promoting better sleep/wake cycles.
R9 Value	High color performance with R9 greater than 90
Color Consistency	4-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color
Color Uniformity	RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Installation
Mounting	The Nano can plug into any compatible USB-A power source and must have constant power to operate as intended.
Base Type	E26 Edison (A19); USB-A (Nano)
Construction
Finish	White
Bulb Shape	A19
Enclosure Material	Plastic
Lens Finish	Frosted
Compliance
Listings	UL Listed
Environment	Suitable for use in dry and damp* environments. *A19 lamps only
Enclosed Fixtures	Suitable for use in enclosed fixtures
Energy Star Approved	This product is ENERGY STAR® Version 2.2 Certified.
Energy Star ID	2397939
Certification Model Number	LCBA19-10-E26-9TW-SS-NS (A19 lamp)SMARTSHIFT ORBIT (Nano)
T20 Compliant	Can be used to conform with the requirements of California Title 20
California Title 24 JA8 Compliant	Can be used to conform with the requirements of California Title 24 Part 6
California Energy Commission (CEC) Status	Lawful for Sales in California
RoHS	Mercury and UV free. RoHS-compliant components.
FCC	Complies with Part 15 of the FCC Rules

LCBA19-10-E26-9TW-SS-NS-2P-1

Write a Review

RAB Lighting

LCBA19-10-E26-9TW-SS-NS-2P-1

Reviews

Get pricing for