Discontinued Occupancy Sensor with LED NightLight, PIR, Wall Switch, 2100SF, 120-277V, Ivory, USMCA, Decora¨
Discontinued Product. Product Line: OSSNL, Technology: Passive Infrared, Switch Type: Single-Pole, LED NightLight, Mounting: Wall Switch, Device Type: Occupancy Sensor, Coverage (Sq.Ft.): 1200 Sq. Ft., Grade: Commercial, Pattern: 180¡, Voltage: 120/277 Volt AC 60Hz, Color: Ivory, Neutral Wire Connection: Required, Domestic Content: USMCA Compliant, Warranty: 5-Year Limited
The passive infrared (PIR) sensor detects motion from a heat-emitting source within its field-of-view to automatically switch lights ON and OFF, offering the same performance features as the ODS family of occupancy sensors. OSSNL has the ability to reduce (dim) and turn off the ÒGuide LightÓ function with a simple dial setting. The LED NightLight consumes less than 1/2 W providing energy savings and guide lighting when room lights are off.
Do you have a question about an
occupancy sensor or vacancy sensor?
Contact us to learn more.
- To_comply_with_T24,_red_LED_indicator_light_flashes_when sensor detects motion to verify detection is active.
- Time_Delay_adjustment_for_delayed-OFF_time_settings of 30 seconds (for walking test), 10 minutes, 20 minutes,_and_30_minutes._Allows_customized_adjustments_to_maximize_energy_savings.
- Light Sensor Adjustable Ambient Light Override ranges_from_approximately_2_foot-candles_(20_lux)_to_500+_foot-candles_(5000+_lux)_to_prevent_lights_from_turning ON automatically during periods of ample natural light, increasing energy savings.
- Light_sensor_enables_the_load_hold-OFF_feature_once_level has been set.
- Vacancy_confirmation_-_when_the_time_out_expires_and_the relays turn OFF, a 30 second vacancy confirmation exists_to_turn_the_relays_back_ON.
- False_detection_circuitry.
- Presentation_Mode_feature_for_slide_or_film_presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied.
- LED_NightLight_offers_ÒGuide_LightÓ_functionality.
- Adjustable_NightLight_illumination_setting_for_continuous or dimmed NightLight.
- NightLight_Mode_-_the_factory_default_setting_for_the_NightLight Mode is Dimmed Mode. This means the NightLight will automatically dim to 5% of full bright-ness after 2 minutes of no occupancy when activated by the internal light sensor.
- One_unit_can_be_used_for_120V_through_277V_lighting._Compatible_with_both_electronic_and_magnetic_ballasts.
- Relay_switches_at_the_zero_crossing_point_of_the_AC_power_curve_to_ensure_maximum_contact_life_and_compatibility with electronic ballasts.
- Exclusive_Levition_H.I.S._Circuitry._Specifically_designed_to handle todayÕs high inrush electronic ballast loads and offer unmatched durability and service.
