Discontinued Occupancy Sensor with LED NightLight, PIR, Wall Switch, 2100SF, 120-277V, Ivory, Decora¨
Discontinued Product. AutoON/AutoOFF PIR Occupancy Sensor (ManualON/AutoOFF selectable) lighting control, 1FC Nightlight (dimmable), Vandal resistant, Manual Wall Switch. Robust Single Latching 10A Relay, Neutral wire required, 120/208/220/230/240/277VAC, 50/60hz, Field of View 2100 sq ft (Motion: Major 60'x40'; Minor 40'x20'), Dual Pyrometers for true 180 degree view with Blinders (32 degree block on each side), Adjustable time delay between 30s-2h, Light Sensor (Photocell) included for Ambient Light Hold-Off feature. CEC Title 20/24 compliant. USMCA Compliant. Wall plate sold separately. Color: Ivory
The passive infrared (PIR) sensor detects motion from a heat-emitting source within its field-of-view to automatically switch lights ON and OFF, offering the same performance features as the ODS family of occupancy sensors. OSSNL has the ability to reduce (dim) and turn off the ÒGuide LightÓ function with a simple dial setting. The LED NightLight consumes less than 1/2 W providing energy savings and guide lighting when room lights are off.
Do you have a question about an
occupancy sensor or vacancy sensor?
Contact us to learn more.
- To_comply_with_T24,_red_LED_indicator_light_flashes_when sensor detects motion to verify detection is active.
- Time_Delay_adjustment_for_delayed-OFF_time_settings of 30 seconds (for walking test), 10 minutes, 20 minutes,_and_30_minutes._Allows_customized_adjustments_to_maximize_energy_savings.
- Light Sensor Adjustable Ambient Light Override ranges_from_approximately_2_foot-candles_(20_lux)_to_500+_foot-candles_(5000+_lux)_to_prevent_lights_from_turning ON automatically during periods of ample natural light, increasing energy savings.
- Light_sensor_enables_the_load_hold-OFF_feature_once_level has been set.
- Vacancy_confirmation_-_when_the_time_out_expires_and_the relays turn OFF, a 30 second vacancy confirmation exists_to_turn_the_relays_back_ON.
- False_detection_circuitry.
- Presentation_Mode_feature_for_slide_or_film_presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied.
- LED_NightLight_offers_ÒGuide_LightÓ_functionality.
- Adjustable_NightLight_illumination_setting_for_continuous or dimmed NightLight.
- NightLight_Mode_-_the_factory_default_setting_for_the_NightLight Mode is Dimmed Mode. This means the NightLight will automatically dim to 5% of full bright-ness after 2 minutes of no occupancy when activated by the internal light sensor.
- One_unit_can_be_used_for_120V_through_277V_lighting._Compatible_with_both_electronic_and_magnetic_ballasts.
- Relay_switches_at_the_zero_crossing_point_of_the_AC_power_curve_to_ensure_maximum_contact_life_and_compatibility with electronic ballasts.
- Exclusive_Levition_H.I.S._Circuitry._Specifically_designed_to handle todayÕs high inrush electronic ballast loads and offer unmatched durability and service.
Size: Height 4.06" (103.2mm), Width 1.75" (44.4mm), Depth 1.83" (47mm), Install Depth 1.35" (34.4mm), Install Height 2.60" (66.2mm)
Switch Type: Single-Pole, LED Nightlight
Color: Ivory
Feature: Occupancy Sensor with NightLight
Grade: Commercial
Mounting: Wall Switch
Product Line: OSSNL
Sensor Technology: Passive Infrared (PIR)
Sensor Type: Occupancy
Time Delay: 30s-30m
Load Rating: Fluorescent: 1200VA @ 120V, 2700VA @ 277V - Incandescent: 800W @ 120V - Motor: 1/8 HP @ 120V
Neutral Wire Connection: Required
Voltage: 120/230/277 VAC
Wiring: Line - Black, Load - Blue, Ground - Green, Neutral - White
Title 24 Compliant: Yes
Pattern: 180¡
Relative Humidity: 20% to 90% non-condensing
Storage Temperature Range: 14¡ to 185¡F (-10¡ to 85¡C)
