Discontinued Vacancy Sensor, PIR, Wall Switch, 2100SF, 120-277V, Ivory, Decora¨
Discontinued Product. Vacancy Sensor, PIR, (ManualON/AutoOFF) Lighting Control, Vandal resistant, Manual Wall Switch. Robust Single Latching 10A Relay, No-Neutral wire required, 120/208/220/230/240/277VAC, 50/60hz, Field of View 2100 sq ft (Motion: Major 60'x40'; Minor 40'x20'), Dual Pyrometers for true 180 degree view with Blinders (32 degree block on each side), Adjustable time delay between 30s-30m, Light Sensor (Photocell) included for Ambient Light Hold-Off feature. CEC Title 20/24 compliant. USMCA Compliant. Wall plate sold separately. Color: Ivory
The Leviton Decora¨ Wall Switch Passive Infrared (PIR) Vacancy Sensor (ODS10-TD) uses PIR detection technology to monitor a room for vacancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion. Once the lights have been manually turned ON, the lights will remain ON as long as there is an occupant moving through the sensor zones.
Do you have a question about an
occupancy sensor or vacancy sensor?
Contact us to learn more.
- Fits in standard wallbox and replaces single-pole wall switch. Gangable with other units
- Low-profile design eliminates obtrusive Òscanning-deviceÓ look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with LevitonÕs popular line of Decora wiring devices.
- 180¡ field-of-view provides approximately 2,100 square feet of coverage suitable for small offices, conference rooms, classrooms, lounges and a variety of commercial areas
- Convenient pushbutton provides manual-ON/OFF light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive Òminor motionÓ area where even slight body movements will be detected
- Vandal resistant PIR lens
- Blinders-horizontal field-of-view may be adjusted between 180¡ and 60¡ of arc by using integral blinders located on either side of the lens. No masking tape required.
- Manual-ON/auto-OFF vacancy sensors for installations where manual-ON switching is required but auto-OFF switching is still desired
- Red LED indicator light flashes when sensor detects motion to verify detection is active
- Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes and 30 minutes. Allows customized adjustments to maximize energy savings.
- Vacancy confirmation-when the time out expires and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts.
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton H.I.S. Circuitry-specifically designed to handle todayÕs high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
Color: Ivory
Grade: Commercial
Mounting: Wall Switch
Product Line: ODS10
Sensor Technology: Passive Infrared (PIR)
Sensor Type: Vacancy
Time Delay: 30s-30m
Listings: UL/cUL Listed, can be used to comply with Title 24, Part 6 occupancy sensing requirements and NYCL48
USMCA Compliant: Yes
Pattern: 180¡
Neutral Wire Connection: Not Required
Power Consumption: 120V - 100mW, 277V-250mW
Voltage: 120-277 VAC
Wiring: Line - Black, Load - Blue, Ground - Green, No neutral required
Size: Height 4.06" (103.2mm), Width 1.75" (44.4mm), Depth 1.83"(47mm), Install Depth 1.35"(34.4mm), Install Height 2.60"(66.2mm)
Switch Type: Single-Pole
Relative Humidity: 20% to 90% non-condensing
Storage Temperature Range: 14¡ to 185¡F (-10¡ to 85¡C)
