Leviton MS4X-402 40 Amp, 600 Volt, 2-Pole, Non-Fused Manual Motor Controller, Suitable as Motor Disconnect, Type 4X Thermoplastic Enclosure, IP67-Watertight, NSF Certified
Dielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Flammability: Rated V-0 per UL 94
Grounding: Non-Grounding
Operating Temperature: -40¡C to 60¡C
Pole: 2
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Enclosure Rating: Type 4X
Hosedown: Type 4X per UL 50
Rain: Type 3R per UL 50
Enclosure: Thermoplastic Polyester
Terminal Screws: Nickel-Plated Brass 10-32
Dielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Flammability: Rated V-0 per UL 94
Grounding: Non-Grounding
Operating Temperature: -40¡C to 60¡C
Pole: 2
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Enclosure Rating: Type 4X
Hosedown: Type 4X per UL 50
Rain: Type 3R per UL 50
Enclosure: Thermoplastic Polyester
Terminal Screws: Nickel-Plated Brass 10-32
40 Amp, 600 Volt, 2-Pole, Non-Fused Manual Motor Controller, Suitable as Motor Disconnect, Type 4X Thermoplastic Enclosure, IP67-Watertight, NSF Certified
Powerswitch¨ Industrial Grade AC Manual Motor Controllers provide safe, reliable control of a variety of motor loads. Typical applications include manual ON/OFF switching control of conveyor systems, pumping machines, HVAC systems, air compressors and other heavy manufacturing equipment. These motor controllers are available for both single-phase and three-phase applications.
Electrical Specifications
Amperage: 40 ADielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Flammability: Rated V-0 per UL 94
Grounding: Non-Grounding
Operating Temperature: -40¡C to 60¡C
Pole: 2
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Environmental Specifications
Dust: Type 12K per UL 50Enclosure Rating: Type 4X
Hosedown: Type 4X per UL 50
Rain: Type 3R per UL 50
Material Specifications
Contacts: Silver-Cadmium .031 ThickEnclosure: Thermoplastic Polyester
Terminal Screws: Nickel-Plated Brass 10-32
Mechanical Specifications
Crush Test: 100 lbs Impact: 1.2 lb ball dropped from 5 ft
Mold Stress Relief: 70¼C for 7 hours
Product ID: Ratings are permanently marked on device
Terminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, L1, L2 marked on back of switch mechanism
Termination: Switch Mechanism Back & Side
Torque Range: 20 inch pounds
xxx: Remains in place with 20lb push
NEMA: WD-1 & WD-6
NOM: NOM-ANCE
NSF: 14159-1 Meat & Poultry Processing Equipment
UL 60947-4-1: supersedes UL 508
Warranty: 2-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
Mold Stress Relief: 70¼C for 7 hours
Product ID: Ratings are permanently marked on device
Terminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, L1, L2 marked on back of switch mechanism
Termination: Switch Mechanism Back & Side
Torque Range: 20 inch pounds
xxx: Remains in place with 20lb push
Standards and Certifications
ANSI: C-73NEMA: WD-1 & WD-6
NOM: NOM-ANCE
NSF: 14159-1 Meat & Poultry Processing Equipment
UL 60947-4-1: supersedes UL 508
Warranty: 2-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
Product Features
Device Type: Enclosed SwitchElectrical Specifications
Amperage: 40 ADielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Flammability: Rated V-0 per UL 94
Grounding: Non-Grounding
Operating Temperature: -40¡C to 60¡C
Pole: 2
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Environmental Specifications
Dust: Type 12K per UL 50Enclosure Rating: Type 4X
Hosedown: Type 4X per UL 50
Rain: Type 3R per UL 50
Material Specifications
Contacts: Silver-Cadmium .031 ThickEnclosure: Thermoplastic Polyester
Terminal Screws: Nickel-Plated Brass 10-32
Mechanical Specifications
Crush Test: 100 lbs Impact: 1.2 lb ball dropped from 5 ft
Mold Stress Relief: 70¼C for 7 hours
Product ID: Ratings are permanently marked on device
Terminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, L1, L2 marked on back of switch mechanism
Termination: Switch Mechanism Back & Side
Torque Range: 20 inch pounds
xxx: Remains in place with 20lb push
NEMA: WD-1 & WD-6
NOM: NOM-ANCE
NSF: 14159-1 Meat & Poultry Processing Equipment
UL 60947-4-1: supersedes UL 508
Warranty: 2-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
Mold Stress Relief: 70¼C for 7 hours
Product ID: Ratings are permanently marked on device
Terminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, L1, L2 marked on back of switch mechanism
Termination: Switch Mechanism Back & Side
Torque Range: 20 inch pounds
xxx: Remains in place with 20lb push
Standards and Certifications
ANSI: C-73NEMA: WD-1 & WD-6
NOM: NOM-ANCE
NSF: 14159-1 Meat & Poultry Processing Equipment
UL 60947-4-1: supersedes UL 508
Warranty: 2-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
Product Features
Device Type: Enclosed Switch
