48 Volt DC, 2 Pole, 2 Wire, Equipment Cabinet SPD Surge Protective Device
Wired-In Module, DIN-Rail Mounted, Terminal Block Wired, in a NEMA 1 Enclosure
LevitonÕs Surge Protection Devices can be used individually or as part of a coordinated application strategy, to protect sensitive electronic equipment, in industrial, commercial and residential locations, from the stress and degradation inflicted by voltage transients. Leviton Surge Protection Devices are compliant with UL 1449 Standards. LevitonÕs outstanding Surge Protection Devices divert damaging voltage transients, or surges, away from electronic equipment. Transients are diverted away from sensitive micro circuitry, providing protection against catastrophic failure, costly downtime and data disruptions.
Operating Temperature: -10¡C to 60¡C
Relative Humidity: 20% to 90% non-condensing
Storage Temperature: -20¡C to 85¡C
DIN-Rail Material: Polycarbonate
Maximum Capacitance: 4.8_f
Maximum DC Operating Voltage: 52.8V
Maximum Surge Current 10 x 1000_sec: 10A
UL497B Clamping: 71V
Diagnostics: LED
Joules Rating: 280
MCOV: 52.8V DC
Mounting Type: DIN-Rail
Noise Rejection: -35 dB at 5kHz-5MHz
Pole: 2
Standards and Certifications: UL1449 / CSA / ANSI/IEEE Cat ABC
Type: Wired-In Module
UL1449 Impulse Perm Wired Test L-N/L-G/N-G: /62/
Voltage: 48 VDC
Wire: 2
Wiring: Terminal Block
UL: 497B Listed
Warranty: 5-Year Limited
Operating Temperature: -10¡C to 60¡C
Relative Humidity: 20% to 90% non-condensing
Storage Temperature: -20¡C to 85¡C
DIN-Rail Material: Polycarbonate
Maximum Capacitance: 4.8_f
Maximum DC Operating Voltage: 52.8V
Maximum Surge Current 10 x 1000_sec: 10A
UL497B Clamping: 71V
Diagnostics: LED
Joules Rating: 280
MCOV: 52.8V DC
Mounting Type: DIN-Rail
Noise Rejection: -35 dB at 5kHz-5MHz
Pole: 2
Standards and Certifications: UL1449 / CSA / ANSI/IEEE Cat ABC
Type: Wired-In Module
UL1449 Impulse Perm Wired Test L-N/L-G/N-G: /62/
Voltage: 48 VDC
Wire: 2
Wiring: Terminal Block
UL: 497B Listed
Warranty: 5-Year Limited