Made in the USA The GAUP-EMG-48-2L-T8 Wet Location Fluorescent Light Fixture from Larson Electronics is UL 1598A and UL 924 listed and is specifically designed to handle the rigors of wet and corrosive marine environments. This fixture is equipped with an added battery backup providing 90 minutes of emergency runtime. The GAUP-EMG-48-2L-T8 contains no glass and is suitable for food prep areas. However, it is NOT certified as "food safe." The GAUP-EMG-48-2L-T8 wet location fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 924 rated. The GAUP-EMG-48-2L-T8 carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This fluorescent light works, mounts and is wired like our HALP-48-2L explosion proof fluorescent light fixtures. The main differences are that this unit is NOT explosion proof and we add a battery backup unit that adds emergency light functionality to the fixture. This wet location emergency light will run the standard UL suggested 90 minutes after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 900 lumens for 90 minutes. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode. Click here to see the LED version of this light Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge NOTE ON LAMPS: This fixture comes equipped with F32-T8/841 32 Watt lamps producing 2,950 lumens per bulb, a 4100 Kelvin color and a 24,000 hour rated service life. Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 36 9/16 inches on center apart along the top of this wet location light. The mounting holes are 7 inches on center across the top of the light. Pendant Mounting: This light fixture can hang from the ceiling suspected by rigid pipe. Each fixture is equipped with either two 1/2" or 3/4" NPT hubs on either side of the fixture. Operators will bring rigid pipe down to the threaded mounting ups. The wiring is fed down through the rigid pipe to one of the NPT hubs and tied to the fixture`s lead wires to complete the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture. Suggested Applications: The GAUP-EMG-48-2L-T8 is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information GAUP-EMG-48-2L-T8 Wet Location Emergency Light Fixture U.L. Ratings UL Listing: United States - Canada UL 924 - Failsafe Battery Backup Lamp Type: Fluorescent UL 1598A Marine Type (Salt Water) Dimensions: 8.25"W x 52"L x 7"H Switch Leg for Powering Light On/Off Weight: 8 lb cUL Listed for Canada Voltage: Multi-Voltage - 120 V 60 Hz, 220 V 50 Hz, 240 V 60 Hz, or 277 V 60 Hz Meets US Coast Guard Specifications Low Voltage Optional: 9-32 V DC Total Watts: 64 Watts Total Lumens: T8 Bulbs 5,900 Luminous Efficacy: 92 Lm/W Lamp Life Expectancy: 20,000 Hours Color Temp: 4100K - CRI -75 Ambient Operating Temp Range: -30¡C to +70¡C Special Orders- Requirements Battery Backup: 90 Minute Runtime Contact us for special requirements Surface Mounting: (2) Flange Type Aluminum Brackets Toll Free: 1-800-369-6671 Pendant Mounting: (2) 1/2" or 3/4" Threaded NPT Hubs on Either Side Intl: 1-214-616-6180 Wiring Hub: (2) 1/2" or 3/4" Threaded Hubs E-mail:[email protected] -Scroll Down to Purchase-
Larson Electronics Wet Location Emergency Fluorescent Light - 4' 2 lamp - T8 Lamps - Enclosed & Gasketed - No Glass
Larson Electronics
(No reviews yet)
Write a Review
Write a Review
Larson Electronics
Larson Electronics Wet Location Emergency Fluorescent Light - 4' 2 lamp - T8 Lamps - Enclosed & Gasketed - No Glass
- SKU:
- GAUP-EMG-48-2L-T8
- UPC:
- Weight:
- 0.00 LBS
!