Larson Electronics Vapor Proof (Waterproof) LED Inspection Light / Hand Lamp / Drop Light - Colored LED Bulb- 100' Cord

Made in the USA The VPLHL-LEDC-100 from Larson Electronics is a LED Inspection Hand Lamp with Colored LED Light that is both waterproof and vapor proof and constructed and certified to prevent the intrusion of water and/or moisture into the handle and/or head when used as instructed in wet locations. This handheld inspection drop light is offered in red, blue, green, amber, and white light outputs and is ideal for inspection in manufacturing and automotive applications.This waterproof and vapor proof LED light is available in 120-277V AC, 11V AC/DC, 25V AC/DC light configuration. This 10 watt, LED work light from Larson Electronics produces 1050 lumens of colored lighting and comes complete with a 100 foot long 16/3 SOOW Cable for long range and convenient operation. This waterproof and vapor proof drop light features a rubberized, insulated handle to provide a safe and secure grip and a stainless steel wire guard enclosure to protect the glass dome. These LED inspection lights improve on the desirable qualities of similar incandescent models with higher foot candle light output, cooler operation and better light quality, and are ideal for use in wet areas and close work. The cool operation, good light color and evenness of coverage makes these lights ideal for a wide variety of close quarter work and inspection activities.This LED lamp has a 50,000 hour operational life and is available in 120-277V AC, 11V or 25V configurations for high or low voltage operation. The 10 watt LED lamp used in this unit produces nearly 3 times the illumination of incandescent lamps as measured in foot candles, at less than 1/10th of the electricity usage and without the associated heat. Unlike traditional lighting that require colored lenses or special coatings, the LED bulb in this drop light produces uses high output colored LEDs, providing a brighter and more durable inspection light. This LED drop light runs at operating temperatures of 55¡F, greatly reducing the chances of accidents or burns commonly associated with incandescent drop lights. This lamp has no ballast, which reduces lamp weight, a steel globe guard, and a stainless steel hook for easy overhead mounting. The solid state LED bulb has no filament, making it resistant to damage from impacts and dropping. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These drop lights can operate on current ranging from 100 to 277V AC without any modifications necessary as a result. We also offer a low voltage 11V or 25V AC/DC version for low voltage applications. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This vapor proof LED drop light is equipped with 100 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. OSHA requires the light to be plugged into a GFI protected outlet. This lamp illuminates an area approximately 8 feet wide in all directions, is certified waterproof and vapor proof, and suitable for use in wet areas. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Lamp Features 10 watt LED Lamp 50,000 hour service life Rubberized HandleNo Ballast 100` SOOW CordStainless Steel Swivel HookWaterproof/Vapor Proof Specifications / Additional Information VPLHL-LEDC-100 Vapor Proof LED Inspection Light U.L. Ratings UL Listing: United States Rugged Rubber Handle for Secure Grip Lamp Type: LED No Ballast Dimensions: 13"L x 4.5"Dia Head x 2"Dia Handle 100` SOOW Cord Weight: 15 lbs Aluminum Swivel Hook Voltage: 120-277 Volts 50/60 Hz,11V AC/DC, or 25 Volts AC/DC Wire Guard for LED Bulb Protection Total Watts: 10 Watts 50,000+ Hours of Operational Life Lumens: 1,050 (White) Multiple Cord Cap Options Luminous Efficiency: 105 Lm Waterproof / Vapor Proof Lamp Life: 50,000 Hours Multiple Lamp Color Options Lamp Color: Red, Blue, Green, Amber or White CRI: >75 White Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.08 amps @ 120V, 0.04 amps @ 240V, 0.04 amps @ 277V Ambient Operating Temp Range: -50¡C to +85¡C Material: Rubber / Stainless Steel Special Orders- Requirements Mounting: Aluminum Hook Contact us for special requirements Wiring: 100` 16/3 AWG SOOW Cable Toll Free: 888-325-4448 Cord Cap: 5-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail Warranty: Yes - 3 Years E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Please click here to see our 3 Year Warranty pamphlet. Scroll Down to Purchase-