Larson Electronics Temporary Power Distribution Panel - 240D/120V 3PH MLO - (1) L15-30R (1) L14-30R (2) 5-20R GFCI DPLX

Made in Texas The Larson Electronics MGP-240D.120V-60APS-3PH-2X2P.20A-1X2P.30A-1X3P.30A temporary power distribution system features a 240D/120VAC three phase 60-amp main lug only panel with receptacles. This unit provides operators the ability to safely tap into and distribute 240D/120VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MGP-240D.120V-60APS-3PH-2X2P.20A-1X2P.30A-1X3P.30A portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect three phase 240D/120VAC using a 25` 8/5 Type W cord with a 560P7W pin/sleeve cord cap. Operators may access one L15-30R 250V and one L14-30R 125/250V receptacles, and two 5-20R, 125V duplex GFCI receptacles for their equipment. Operation: A 25` 8/5 Type W cord with a 60-amp pin/sleeve 560P7W cord cap brings three-phase 240D/120VAC power to the NEMA 3R 60-amp 240D/120VAC three phase main lug only primary panel. The panel contains one 30-amp, 3-pole, 250V breaker protecting one 30-amp, L15-30R, 250V receptacle, one 30-amp, 2-pole, 250V breaker protecting one 30-amp, L14-30R, 125/250V receptacle, and two 20-amp, 1-pole, 125V breakers protecting two 20-amp, 5-20R, 125V GFCI duplex receptacles. All receptacles are equipped with weatherproof covers. Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. A dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGP-240D.120V-60APS-3PH-2X2P.20A-1X2P.30A-1X3P.30A -Temporary Power Distribution Ratings Line In: 25` 8/5 Type W Cord Max PDU OCP/Primary Output: 60A @ 240V Cord Cap: 60A 560P7W Pin/Sleeve [Rated @ 480Y/277V] UL 1640 Portable Power-Distribution Equipment Primary Panel: 240D/120V 3PH 60A MLO N3R NEMA 3R Indoor or Outdoor Use Primary Breakers: (1) 30A 3P [250V], (1) 30A 2P [250V], (2) 20A 1P [125V] Made in the USA Primary Receptacles: (1) 30A L15-30R [250V], (1) 30A L14-30R [125/250V], (2) 20A 5-20R Duplex GFCI [125V] Primary Protection: Weatherproof Covers, GFCI Form Factor: Powder Coated Steel Dolly Cart (No Tires) Special Orders- Requirements Dimensions: W-40" X D-40" X H-48" Contact us for special requirements Weight: 350 lbs Toll Free: 888-325-4448 Intl: 1-214-616-6180 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase