Larson Electronics Temporary Power Distribution - 208Y/120V 3PH - 125A MCB - (2) L14-30R (20) 5-20R GFCI Duplex

Made in Texas The Larson Electronics MGP-208Y.120V-125MB-3PH-20X5.20A-2XL14.30A temporary power distribution system provides operators with a primary and secondary three-phase voltage of 208Y/120V AC. This unit provides operators the ability to safely tap into and distribute 208Y/120V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MGP-208Y.120V-125MB-3PH-20X5.20A-2XL14.30A portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 208Y/120V AC using 15` of #2 Type W cable. On the secondary side, operators connect to two L14-30R receptacles for 240V equipment and to twenty 5-20R GFCI duplex receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: A 15` #2 Type W cable brings three-phase 208Y/120V AC power to the NEMA 3R 125-amp 208Y/120V three phase main circuit breaker panel. The main breaker panel contains two 30-amp, 2-pole GFCI 250V breakers protecting two 30-amp, 250V, L14-30R receptacles and twenty 20-amp, 1-pole, 125V breakers protecting twenty 20-amp, 125V, 5-20R duplex GFCI receptacles. Protective Construction: The portable panel and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Four casters (front two casters swivel) and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA and can be equipped with skids or trailer mounted. Certification: Larson Electronics is an NRTL Certified to UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and NRTL certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGP-208Y.120V-125MB-3PH-20X5.20A-2XL14.30A -Temporary Power Distribution Ratings Line In: 15` #2 Type W Cable NRTL Certified to UL 1640 Portable Power-Distribution Equipment Voltage: 208Y/120V AC 3PH NEMA 3R Indoor or Outdoor Use Panel: 125A 208Y/120V 3PH MCB N3R Made in the USA Breakers: (2) 30A 2P GFCI [250V], (20) 20A 1P [125V] Receptacles: (2) 30A L14-30R [250V], (20) 20A 5-20R GFCI Duplex [125V] Secondary Protection: GFCI, Weatherproof Covers Special Orders- Requirements Form Factor: Powder Coated Steel Dolly Cart w/ (4) Casters - Front (2) Casters Swivel Contact us for special requirements Dimensions: 40"W x 40"D x 48"H Toll Free: 888-325-4448 Weight: 350 lbs Intl: 1-214-616-6180 Max Primary OCP: 125A @ 208V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase