Larson Electronics Replacement Emergency Backup Ballast for Explosion Proof LED Light Fixtures - 90 Minute Runtime

The XXL-EMG-RDRVR-20 from Larson Electronics is a replacement emergency backup inverter for emergency lighting units with a faulty or non-functioning inverter. The XXL-EMG-RDRVR-20 fits into existing compatible enclosures or explosion proof cases or those that are provided by the operator for their specific needs. The XXL-EMG-RDRVR-20 has an input voltage of 120-277V AC, an input current of 65 mA and an AC input power rating of 8W. The included nickel cadmium battery provides an emergency runtime of 90 minutes and has a life expectancy of 7-10 years. The XXL-EMG-RDRVR-20 supports emergency illumination for a minimum of 90 minutes. At a maximum of 20 W at unity power factor, the XXL-EMG-RDRVR-20 will provide input power to ballasted lamp supporting it at 100% of the AC rated output throughout the 90-minute emergency illumination period. Upon failure of normal power, the ballast instantly begins providing emergency power to the connected lighting load for a minimum of 90 minutes. A solid-state low voltage disconnect circuit protects the inverter battery from severe damage by deep discharge during prolonged power failures. When normal power is restored, the XXL-EMG-RDRVR-20 automatically returns to charge mode. The battery capacity is fully restored in 24 hours. The ballast does not affect normal fixture operation and may be used with a switched or unswitched fixture. It can be installed in close proximity to the fixture or remote from the fixture (up to 250 feet). At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information XXL-EMG-RDRVR-20 Replacement Emergency Backup Inverter Ratings/Features: Type: Remote Emergency Power Inverter UL924 Emergency Lighting Compliant Battery Type: Maintenance-free Nickel Cadmium Battery Maintenance-free Nickel Cadmium Rechargeable Battery Case Dimensions: 16.6" L x 2.8" W x 2.85" H 90 Minute Emergency Run Time Weight: 5 lbs Remote Installation up to 250` From Fixture Temperature Rating: 0¡C to 50¡C Sine Wave Output Battery Charging Current: 250 mA LED Indicator Lights Signal Status Input Voltage: 120V AC 60Hz or 277V AC 60Hz 24 Hour Battery Recharge Time Output Voltage: 120V AC 60Hz or 277V AC 60Hz Factory or Field Installation (Indoor and Damp) Maximum Load Power: 20W Battery Recharge Time: 24 hours Output: Sine Wave Case Material: No Case Mounting: Surface Mount Special Orders- Requirements Installation: Remote (Up To 250` Away From Fixture) Contact us for special requirements Emergency Run Time: 90 minutes Toll Free: 888-325-4448 Test Switch: Single Pole Warranty: Yes- 3 Years* E-mail: [email protected] Scroll Down to Purchase-