Larson Electronics *RENTAL* Explosion Proof Fluorescent Fixture - 2', 2 Lamps - Multi-Voltage -Class I, Div. I *RENTAL*

Made in the USA This unit is for rentals. The Larson Electronics RNT-EPL-24-2L Explosion Proof Fluorescent Light Fixture is U.S./Canada UL Listed Class 1 Division 1, Class II Division 1 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.The RNT-EPL-24-2L fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 1 and Class II Division 1&2 explosion proof fluorescent light and an ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes standard with F24-T5/HO lamps and is available with a variety of lamp options which are listed below. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is UL Listed for use in paint spray booths. The EPL-24-2L provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability. Click Here to Enlarge Click Here to Enlarge Click Here to Enlarge NOTE ON LAMPS: We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. We standardize on the T-5HO bulbs mostly for their longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very cold conditions and T-12HO bulbs operate well in those environments. The T12VHO, 110 watt Very High Output lamps make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications. Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fluorescent light. Made in USA Quality Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection. F24-T5HO – 2000 lumens per bulb (4000 lumens total), 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98F24-T12/HO – 1650 lumens per bulb (3300 lumens) 9,000 hours life, 4100 Kelvin color F17-T8/HO – 1325 lumens per bulb (2650 lumens total), 24,000 hours life, 4100 Kelvin color F24-T12-D-HO – 1650 lumens per bulb (3300 lumens), 9,000 hours life, 5100 Kelvin color (76 CRI - Color Rendition) - This specialty lamp is designed to mimic daylight conditions. For paint spray booth operators requiring a brighter color light than a traditional "cool white", this bulb can be useful. Note: There is some confusion on T-12 bulbs. There are 2 types of T-12 bulbs. The older T-12 bulbs ran on magnetic ballasts. Those ballasts have vanished and the T-12 bulbs that work with those ballasts are vanishing as well. All of our explosion proof fluorescent fixtures use electronic ballasts and the F48-T12/HO bulb is widely available and low cost to replace. We use Philips bulbs and they plan to continue the T-12 series indefinitely, as does GE. In fact, GE is now selling an electronic ballast replacement for T12 based fixtures that formerly operated with their magnetic ballasts. Specifications / Additional Information RNT-EPL-24-2L Explosion Proof U.L. Ratings UL Listing: United States - Canada Class 1 Division 1, Groups C and D Dimensions: W-11.25" L-27.5" H-8.5 " Class 1 Division 2, Group A,B,C,D Weight: 55 Lbs Class II Division 1- 2, Groups E,F,G Total Watts: 48 watts* UL 844, 924 Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz UL 1598 Marine Type Total Lumens: STD-T5-HO Bulbs 4000 UL 595 Outdoor Marine Type (Saltwater) Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours UL listed for Paint Spray Booths* Efficiency: STD-T5-HO Bulbs 83 Lumens per Watt Operating Temp Range: T6 Rated Beam Angle: N/A Color Temp: 4100K- Special Orders- Requirements Mounting: Bracket Standard - Pendant Optional Contact us for special requirements Wiring Hub: 1/2 inch threaded Phone: 1-214-616-6180 Rental Type: Monthly, Weekly, Daily Toll Free: 888-325-4448 U.L Approval: U.S Certificate Canada Certificate Fax: 1-903-498-3364 View a Photometric Graph of the EPL-48-2L Bulb Types E-mail: [email protected] *Wattage totals are lamps only and may vary with different lamps. Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-EPL-24-2L;Monthly...$125.00 USDWeekly...$75.00 USDSubtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed.