Larson Electronics *RENTAL* Class 1 Division 2 Fluorescent LED Light for Corrosion Resistant Requirements (Saltwater)

Made in the USA The Larson Electronics RNT-HALP-48-2L-LED Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed and is specifically designed to handle the rigors of wet and corrosive marine environments. This unit is for rental contracts. The RNT-HALP-48-2L-LED hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The RNT-HALP-48-2L-LED also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This lamp offers the extreme durability, high efficiency and long life of high power LEDs in a proven hazardous location fixture design. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge The RNT-HALP-48-2L-LED is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 15% more foot candles of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. The 24 watt LED lamps produce more illumination than standard T8 bulbs, but draw only 3/4 of current. The RNT-HALP-48-2L-LED is multi-voltage (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. NOTE ON LAMPS: All hazardous location lights are shipped with bulbs. Two 24 watt LED tube bulbs come equipped with this fixture with a color temperature of 5300K and a 50,000 hour life span. The RNT-HALP-48-2L-LED has an electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ. Surface Mount (Standard)Click Photo to Enlarge Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 36 9/16 inches on center apart along the top of this hazardous location light. The mounting holes are 7 inches on center across the top of the light. Pendant Mount (Optional)Click Photo to Enlarge Suspension/Pendant Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with either two 1/2" or 3/4” NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to one of the NPT hubs and tied in to the fixture’s lead wires, completing the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture. Suggested Applications: The RNT-HALP-48-2L-LED is designed for marine, wet, damp locations where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks. Made in USA Quality Superior LED Benefits 1. Each unit dialectrically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. 3. Fixture housing constructed of glass fiber reinforced polyester. 4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other. 5. Relamping done via 6 stainless steel snap locking latches which enables the operator to remove the door and access the lamps. 6. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection. . 7. 1/2" or 3/4", threaded access hole for wiring conduit. 1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information RNT-HALP-48-2L-LED Hazardous Area U.L. Ratings UL Listing: United States - Canada Class 1 Division 2, Groups A, B, C, D Dimensions: W-8.25 " L-52 " H-7" UL 844 Weight: 8 Lbs UL 1598A Marine Type (Salt water) Total Watts: 48 watts Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz Lamp Life Expectancy: LED T-Series 50,000 Hours Efficiency: LED T-Series 90 Lumens per Watt Operating Temp Range: T4A Rated -30 C to 85 C Minimum Operating Temp: -30 C Maximum Case Temp: 90 C Beam Angle: 150 degrees Color Temp: 5300K- Special Orders- Requirements Mounting: Flange type stainless steel Contact us for special requirements Wiring Hub: 1/2" or 3/4" threaded Toll Free: 888-325-4448 Rental Type: Monthly, Weekly, Daily E-mail: [email protected] U.L Approval: U.S Certificate Canada Certificate Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 888-325-4448 or (903) 498-3363 for further information if required. Rental prices for the RNT-HAL-48-2L-LED;Monthly...109.00 USDWeekly...81.25 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for shipping, repairs, and excessive cleaning, if needed.