Larson Electronics *RENTAL* Class 1 Div. 2 Fluorescent Light - Stainless Steel- Corrosion Resistant - Saltwater

Made in the USA The Larson Electronics RNT-HALSS-48-2L Hazardous Area Fluorescent Light Fixture is UL Listed Class 1 Division 2 Groups A, B, C and D - UL 1598A listed and is specifically designed to withstand high vibration locations and the rigors of wet and corrosive marine environments. This unit is for rental contracts. The RNT-HALSS-48-2L hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a stainless steel housing, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The RNT-HALSS-48-2L also carries UL 1598A and UL 595 outdoor marine ratings and meets US Coast Guard specifications. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge This fixture is designed for heavy duty use in applications where intense vibration and corrosive environments may be encountered. Stainless steel construction, high impact acrylic lamp covers, and a Class 1 Division 2 U.L. rating make this light ideal for hazardous areas that require illumination with above average dependability. NOTE ON LAMPS: This fixture comes equipped with F54-T5/841/HO – 54 Watt lamps producing 5,000 lumens per bulb, a 4100 Kelvin color and a 20,000 hour rated service life. We offer F48-T12/HO – 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color and F32-T8/841 – 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color tubes as lamp options for this fixture. The RNT-HALSS-48-2L has an electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ. 24 Volt models available on request for an additional $100 per unit charge. Standard Flange Brackets: Stainless steel bracket mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide flexibility in setting the angle of the fixture. Three through holes provide sufficient mounting for any environment. Suggested Applications: The RNT-HALSS-48-2L is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This lamp is also ideal for locations where heavy vibratory conditions are present. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks. Made in USA Quality Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface.3. Fixture housing constructed of 14 gauge stainless steel..4. Relamping done via stainless steel snap locking latches which allow the operator to remove the door and access the lamps.5. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection.6. 1/2 inch, threaded access hole for wiring conduit. F54-T5/841/HO – 54 Watt, 5000 lumens per bulb, 20,000 hours life, 4100 Kelvin color F48-T12/HO – 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color F32-T8/841 – 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color Specifications / Additional Information RNT-HALSS-48-2L Hazardous Area U.L. Ratings UL Listing: United States UL 844 Class 1 Division 2, Groups A, B, C, D Dimensions: W-9 1/2" L-54 " H-6 3/4" UL 595 outdoor marine Weight: 35 Lbs UL 1598A Marine Type (Salt water) Total Watts: 108 watts* Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz (24V on Request) Total Lumens: STD-T5-HO Bulbs 10,000 Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours Efficiency: STD-T5-HO Bulbs 92 Lumens per Watt Operating Temp Range: T4C Rated -30 C to 70 C Minimum Operating Temp: -30 C Maximum Case Temp: 90 C Beam Angle: N/A Special Orders- Requirements Color Temp: 4100K- Contact us for special requirements Mounting: Flange type stainless steel Toll Free: 888-325-4448 Wiring Hub: 1/2 inch threaded Rental Type: Monthly, Weekly, Daily E-mail: [email protected] U.L Approval: U.S Certificate Meets US Coast Guard specifications. *Wattage totals are lamps only and may vary with different lamps. Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 888-325-4448 or (903) 498-3363 for further information if required. Rental prices for the HAL-48-2L-UV-8-REN;Monthly...290.00 USDWeekly...193.33 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for shipping, repairs, and excessive cleaning, if needed.