Larson Electronics *RENT* 75KVA Power Distribution Panel - 480V to 208Y/120V 3PH - (2) L21-30R (2) L5-30R (12) GFCI Duplex

Made in TexasThis unit is for rentalsThe Larson Electronics RNT-MPD-4803-75K-250AB-12X120.20-2X120.30-2X208Y power distribution substation converts 480VAC three phase electrical current into 208Y/120V three phase. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power.*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*Portable Power Distribution Purpose and Use: The RNT-MPD-4803-75K-250AB-12X120.20-2X120.30-2X208Y portable power distribution system gives operators the ability to power their 208 and 120 volt equipment from a single system. On the primary side, operators connect 480V three phase using a customer-provided cord. On the secondary side, operators connect to two L21-30R receptacles for 208Y/120V equipment, to two L5-30R receptacles for 120V equipment, and to twelve 5-20R duplex GFCI receptacles for 120V equipment.Operation: A customer-provided cord brings three-phase 480V power to the NEMA 3R 100-amp, 480V three phase primary disconnect, which contains three 100-amp time delay fuses, and passes 480V three phase through to the transformer. The NEMA 3R 75 KVA transformer converts 480V three phase power to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a 208Y/120V, 225-amp main lug three phase N3R panel. This secondary panel contains two 30-amp, 208V, 3P breakers protecting two 30-amp, 208Y/120V, L21-30R receptacles, two 30-amp, 125V, 1P breakers protecting two 30-amp, 125V L5-30R receptacles, and twelve 20-amp, 125V, 1P breakers protecting twelve 20-amp, 125V 5-20R duplex GFCI receptacles. All receptacles are equipped with weatherproof covers.Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeProtective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted.Certification: Larson Electronics is a Certified UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and NRTL certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information RNT-MPD-4803-75K-250AB-12X120.20-2X120.30-2X208Y Power Distribution Line-In Cord: Customer Provided Max Primary OCP: 100A @ 480VLine-In Cord Cap: Customer Provided Max Secondary Output: 208.2A @ 208VPrimary Voltage: 480V 3PH NRTL Certified to UL 1640Primary Disconnect: 480V 100A 3PH N3R Fused @ 100A NEMA 3R Indoor / Outdoor UsePrimary Panel: - N/A Made in the USAPrimary Breakers: N/A Primary Receptacles: - N/A Primary Protection: Time Delay Fuses Transformer: 75KVA 480V to 208Y/120 3PH N3R Secondary Voltage: 208Y/120V 3PH Secondary Panel: 208Y/120V 225A MLO 3PH N3R Secondary Breakers: (2) 30A 3P [208V], (2) 30A 1P [125V], (12) 20A 1P [125V] Secondary Receptacles: (2) 30A L21-30R [208Y/120V], (2) 30A L5-30R [125V], (12) 20A 5-20R Duplex GFCI [125V] Secondary Protection: Breakers, GFCIs, Weatherproof Covers Special Orders- RequirementsForm Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirementsFrame Materials: Powder coated steel frame Toll Free: 888-325-4448Dimensions: 34” X 44” X 58” Intl: 1-903-270-1187Weight: 600 pounds E-mail: [email protected] Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*