Larson Electronics *RENT* 25KVA Temporary Power Distribution - 480V to 120/240V - (4) 20A 120V & (2) 50A 240V Receptacles

Made in TexasThis unit is for rentalsThe Larson Electronics RNT-MGL-25-480-4X120.20A-2X240.50A temporary power distribution system converts 480VAC current to 120/240VAC single phase 60 Hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor applications with a fully potted transformer and NEMA 3R load center. This power distribution system is configured to transform 480V to 240/120V. Operators can connect up to four devices on 120V via 5-20R plugs and two devices on 240V via NEMA 6-50R receptacles with covers.*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*The RNT-MGL-25-480-4X120.20A-2X240.50A temporary power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance, equipment installations and any activities requiring an alternative to native power sources.This portable transformer is designed to operate with 480V, 60hz which it then steps down to 120/240VAC 1ph. The power distribution system on this portable substation makes 120VAC available via (4) 5-20R 20amp, 1P, 125V GFCI protected duplex receptacles and 240 VAC available via (2) NEMA 6-50R 50amp, 2P, 250V receptacles.Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeDescription:The RNT-MGL-25-480-4X120.20A-2X240.50A portable power distribution substation converts 480VAC electrical current to 120/240VAC single phase via a 25KVA transformer (480V to 120/240V, 1PH, 60Hz). 10 feet of #8 Type W line in cable is included to connect the substation to a primary 480V primary power supply. A fused disconnect provides primary line-in protection and supplies primary power to the 25KVA transformer.Secondary current is wired to a 120/240V, single phase, 125-amp main lug load center with breakers for circuit protection. 120/240V line out protection is provided by three 20-amp, 125V, single pole breakers and two 50-amp, 250V, 2 pole breakers.Connection for 240/120VAC is through receptacles mounted on the side of the load center. Receptacles include four 20-amp, 125V, 1P, GFCI waterproof duplex receptacles and two 50-amp, 250V, 2P receptacles. The load center is rated NEMA 3R, the transformer is potted and the entire system is built and certified to UL 1640 standards.The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks.This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150KVA and can be equipped with skids or trailer mounted.Applications:This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations.Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information RNT-MGL-25-480-4X120.20A-2X240.50A -Temporary Power Distribution System RatingsLine In: 10’ #8 Type W UL 1640 Portable Power-Distribution EquipmentPrimary Voltage: 480VAC NEMA 3R Indoor or Outdoor UseDisconnect: 480V 60A 3PH N3R Fused @60A Made in the USATransformer: 25KVA 480-120/240VAC N3R Secondary Voltage: 120/240VAC Secondary Panel: 120/240V 125A MLO 1PH N3R Secondary Protection: (4) 1P 20A 125V (2) 2P 50A 250V Circuit Breakers Secondary 120V Outlets: (4) 1P, 20A, 125V, Weatherproof 5-20R GFCI Protected Receptacles Secondary 240V Outlets: (2) 2P, 50A, 250V, NEMA 6-50R Receptacles Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Dimensions: W-40" X D-40" X H-48" Special Orders- RequirementsWeight: 550 lbs Contact us for special requirementsFeatures: Toll Free: 888-325-4448Max Primary OCP: 60 amps @ 480V Intl: 1-903-270-1187Max Secondary Output: 104.2 amps @ 240V E-mail: [email protected] Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*