Larson Electronics Power Substation - 30 KVA - Converts 480V to 10 120V & 1 208Y AC GFCI Outlets - Stainless Enclosue

Made in the USA The Larson Electronics MGS-30KVA-10X120-2X208 heavy duty power transformer substation converts 480 VAC three phase electrical current to 120/208Y VAC. This unit provides operators the ability to safely tap into and distribute 480 Volt power from a variety of sources including generators and direct grid power and power up to ten 120V tools (via L5-20R) and two 208Y devices (via L6-30). This model is designed for use for both linear (motor) and non-linear loads (lighting, computers, etc.). For that reason, we deliver 120V and 208Y on the secondary and provide a neutral. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGS-30KVA-10X120-2X208 power distribution system provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This portable panel system is designed to receive 480V 3-hase power, which it then steps down and makes available via ten GFCI protected 120 Volt 5-20R receptacles and 208Y VAC available via two protected L6-30 208Y outlets. 20 feet of #6 Type W cord connects line-in power to a 60 amp disconnect switch fused at 50 amps, which controls current to the 30 KVA, 480 Volt, 3 phase to 120/208Y transformer. The transformer is mounted to a 1/8” thick steel plate and the distribution assembly is mounted onto a rugged 2" square carbon steel skid frame. The frame of this power distribution panel features 3" X 6" X 3/8" rectangular carbon steel forklift skid pockets, a top located lifting eyelet, and four locking 8" wheels to allow easy transport. The secondary 100-amp main breaker panel includes ten 20-amp, 120V and two 30-amp breakers and is enclosed in a NEMA 4X stainless steel enclosure. This unit is weatherproof and ideal for use in applications including but not limited to, plant maintenance, wet location operations, as a welding station, shows and exhibits and marine applications. These units are popularly used in wet locations where external power sources are often necessary and work well in combination with vapor proof lights. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information MGS-30KVA-10X120-2X208 Power Transformer Ratings Line-In: 20’ #6 Type W Cable w/ Blunt Cut End UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480 VAC Three Phase NEMA 3R Indoor or Outdoor Use Transformer: 30KVA 480-120/208Y N3R Made in the USA Secondary Voltage: 120/208Y VAC Single Phase Secondary Panel: 100A MB N4X SS Enclosure Breakers: (10) 120V 20A GFCI & (2) 208Y 30A 120V Outlets: (10) 120V 20A w/ Covers 208Y Outlets: (2) 250V L6-30 Twist-Lock w/ Covers Protection: GFCI Outlets, On-board Circuit Breakers Disconnect: 60A 3-Phase Disconnect, Fused at 50A Mounting: Steel Skid Frame w/ Forklift pockets, pickeye Lifting Eyelet, and locking casters Dimensions: 34”-L X 44”-W X 58”-H Special Orders- Requirements Features Contact us for special requirements Max Primary OCP: 36 amps @ 480V Toll Free: 888-325-4448 Max Amps Input: 83 amps @ 208V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local code and meet the minimum requirements of the Nation Electrical Code (NEC Section 250) Scroll Down to Purchase