Larson Electronics Power Distribution System - 25 KVA - 2x 100A & 60A 480V Outlets - Emon Submeter - 10x 5-20 & 2x L530

Made in the USA *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-2X480.100-2X480.60-25K-10X120.20-2X120.30-EMON portable power distribution system gives operators the ability to power their 480 volt equipment and their 120 volt equipment from a single system. This unit is equipped with a three phase E-Mon submeter monitor installed. On the 480 Volt primary side, this power distribution system offers two 100 amp 3-wire, 4-pole receptacles (AR1042) and two 60-amp 3-wire, 4-pole receptacles (NR642). On the secondary side, operators can use ten 20-amp, 120 Volt GFCI outlets and two 30-amp, 120 volt GFCI outlets for single phase equipment. ProtectionOperators provide line-in cable connections to the primary 480V 400-amp main breaker NEMA 3R panel. The primary main breaker protects the 60-amp and 100-amp breakers protecting the AR1042 and NR642 receptacles. A 30-amp breaker protects power to the 25KVA NEMA 3R transformer which steps down 480 Volt 3-phase to 120/208Y 3-phase. The transformer passes power to the 100-amp main breaker 120/208Y NEMA 3R panel. The secondary main breaker protects the ten 20-amp breakers and two 30-amp breakers, which are protecting ten 5-20R receptacles with watertight covers and two L5-30R receptacles. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge The MPD-2X480.100-2X480.60-25K-10X120.20-2X120.30-EMON portable power distribution panel provides an effective power source for operators performing maintenance or construction activities. The customer brings line-in power to a fused ON/OFF disconnect switch which protects the 25 KVA, 480 Volt 3 phase transformer with three phase E-Mon submeter monitor installed. The transformer takes 480V AC and passes 120/208Y to the 100-amp 120/208Y NEMA 3R, 18-ciruit panel. The panel includes ten 20-amp breakers and two 30-amp breakers protecting ten 20-amp 5-20 GFI outlets and two 5-30 30-amp outlets, both with waterproof covers. Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with top located tool tray, forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Units are available up to 150kva and can be equipped with skids or trailer mounted. This unit is weatherproof and ideal for use in applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows and exhibits and marine applications. These units are popularly used in hazardous locations where external power sources are often necessary and work well in combination with explosion proof lights. Larson Electronics is a manufacturer and as such can build portable power distribution systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-2X480.100-2X480.60-25K-10X120.20-2X120.30-EMON Power Distribution System Ratings Primary Voltage: 480V UL 1640 Portable Power-Distribution Equipment Line-In Connection:Customer provided - 1/C #2/0 AWG per Phase Accepted NEMA 3R Indoor or Outdoor Use Primary Panel: 480V 400-amp MCB 3-phase 14KAIC Nema 3R Made in the USA Primary Panel Breakers: (2) 100-amp breakers (RECP), (2) 60-amp (RECP) and 30-amp (TXF) Primary Panel Receptacles: (2) AR1042 480V/100A Rec 3W4P CBT with Cap & (2) NR642 480V/60A Rec 3W4P CBT with Cap Transformer: 25KVA Nema 3R 480V to 120/208Y 3-phase Secondary Voltage: 120/208Y 3-phase Secondary Panel: 120/208Y 100-amp MCB 18-circuit 10KAIC NEMA 3R Secondary Panel Breakers: (10) 120V 20-amp & (2) 120V 30-amp Secondary Panel Receptacles: (10) 120V 20-amp 5-20 GFCI & (2) 120V 30-amp L5-30R GFCI Form Factor: Cube style with skid pockets, 8-inch locking casters and top pick eye Dimensions: 34”-L X 44”-W X 58”-H (68"-H w/ casters) Weight: 650lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 30A @ 480V Toll Free: 888-325-4448 Max Secondary OCP: 68A @ 208Y E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase