Larson Electronics Power Distribution Panel System - 15 KVA - Converts 480V to Eight 120VAC Outlets & Two 208Y outlets

Made in the USA The Larson Electronics MGS-15KVA-120X8O-2X208Y heavy duty power transformer substation converts 480 VAC three phase current to single phase 120V AC and three phase 208Y. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. The MGS-15KVA-120X8O-2X208Y provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This unit is designed to operate with 480 VAC which it then steps down to 120V single phase and 208Y three phase. This transformer makes 120VAC available via 8 GFCI protected receptacles and 208Y available via two 208Y outlets. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge The MGS-15KVA-120X8O-2X208Y converts 480 VAC to single phase 120V AC and 208Y three phase AC. Protection is provided through the use of 8 GFCI protected 120 Volt, 20 amp outlets. 20 feet of Line Power SOOW Cord connects to a fused ON/OFF disconnect switch which controls power to the 15 KVA, 480 Volt transformer. The transformer is mounted to a 1/8” thick diamond plate and the distribution assembly is mounted onto a rugged 2 inch square carbon steel frame with rectangular carbon steel skid pockets and a top located lifting eyelet to allow easy transport. This unit incorporates NEMA 3R panels and transformer and is ideal for use in applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows and exhibits and marine applications. These units are popularly used in hazardous locations where external power sources are often necessary and work well in combination with explosion proof lights. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information MGS-15KVA-120X8O-2X208Y Power Distribution Panel System Ratings Line In: 480 via 20` SOOW cord and 20amp disconnect UL 1640 Portable Power-Distribution Equipment Line Out: 120 & 208Y NEMA 3R Indoor or Outdoor Use Transformer: 15KVA 3P 480 to 120/208Y Made in the USA 120 VAC Outlets: 8 X 20amp GFCI Protected Receptacles 208Y VAC Outlets: 2 X 30amp Receptacles Protection: GFCI Outlets, Circuit Breakers, fused disconnect Mounting: Skid pockets and top lift eye Special Orders- Requirements Max Secondary OCP: 42 amps Contact us for special requirements Max Primary OCP: 20 amps Toll Free: 888-325-4448 Dimensions: 36"W X 36"D X 36"T Disconnect: Fused On/Off Disconnect Switch E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase