Larson Electronics Mobile Power Distribution - 208Y/120V 3PH 100A MCB - (2) 560R9W (8) Duplex GFCI

Made in the USA The Larson Electronics MDC-208Y.120-100MB-8X120-2X208-CEE4P5W Mobile Distribution System distributes and steps down 208V AC electrical current to 120V AC. This power distribution system provides operators the ability to safely tap into 208V AC power from a variety of sources including generators and direct grid power. This portable system is suitable for outdoor applications. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, SPIDERBOX, OR SUBSTATIONS* The MDC-208Y.120-100MB-8X120-2X208-CEE4P5W temporary power distribution system gives operators the ability to power their 208V and 120V equipment from a single system. Operators connect 208 volt using a 15` #4 Type-W line-in cord terminated in an IEC60309 120/208V cord cap, which brings power into the system. Two 560R9W receptacles for 208V equipment and eight GFCI duplex receptacles for 120V equipment are available for completing power connections. Operation: A 15` #4 Type-W line-in cord terminated in an IEC60309 120/208V cord cap brings three phase 208V power into the main load center, which is protected by a 100-amp load center with main breaker for circuit protection. The 100-amp 208Y/120V three phase main circuit breaker panel contains two 50-amp breakers protecting two 60-amp 560R9W 208Y/120V receptacles, and eight 20-amp breakers protecting eight 20-amp 120V GFCI duplex receptacles. All receptacles are equipped with weatherproof covers. The distribution assembly is mounted to a standard upright steel dolly cart, cross-style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat tires and a cart style mounting platform provides easier substation mobility. This temporary power distribution unit can be modified to meet the needs of job-site receptacle requirements. Full power distribution units are available up to 150kva and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MDC-208Y.120-100MB-8X120-2X208-CEE4P5W Mobile Distribution Center Ratings/Approvals Line In Cord: 15` #4 Type W Cord UL 1640 Portable Power-Distribution Equipment Line In Cord Cap: IEC60309 120/208V 3PH NEMA 3R Indoor or Outdoor Use Panel: 100A 208Y/120V 3PH Main Circuit Breaker Panel N3R Made in the USA Max Primary OCP: 100A @ 208V Breakers: (2) 50A, (8) 20A Outlets: (2) 60A 560R9W [208Y/120V], (8) 20A GFCI Duplex [120V] Protection: GFCI, Weatherproof Covers Special Orders- Requirements Grounding: (1) 8` Copper Wire for use with driving ground rods Contact us for special requirements Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Toll Free: 888-325-4448 Dimensions: 24"-L x 18"-W X 52"-H Weight: 75lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase