Larson Electronics Magnetic Infrared LED Light Emitter - 200 IR LEDs - 600W - 750/850/940NM - 9-42VDC - 50X4 LED Array

Buy American Compliant The LEDLB-200X2E-IR-M from Larson Electronics is a Magnetic Infrared LED Light Bar that offers high light output and extreme durability combined with versatile mounting and power options. This IP68 rated infrared LED light bar is waterproof to three meters and produces a 36,000 lumen infrared light beam that can only be seen through the use of night vision goggles. 750Nm, 850Nm or 940Nm versions. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal for use in commercial and industrial security applications as well as military environments. The magnetic base allows for quick mounting on flat, magnetic surfaces. The LEDLB-200X2E-IR-M magnetic, infrared LED light bar from Larson Electronics produces a 2,600` long by 540` wide, 36,000 lumen infrared light beam while drawing only 600 watts @ 50 amps from a 12 volt electrical system. Two hundred 3 watt Edison Edixeon¨ infrared LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more infrared light over a larger area nearer the fixture. These infrared LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon¨ Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours. Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don`t always operate with 12 volts and external generators, transformers or inverters are impractical. LEDLB-200X2E-IR-M 35¡ Flood Beam LEDLB-200X2E-IR-M 10¡ Spot Beam Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the `E` part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon¨ LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme. Click here to view an article on the Generations of Night Vision and Infrared. Mounting: The five 200 lb magnet mounting design on the LEDLB-200X2E-IR-M allows for easy fixture placement and removal. Please note, the magnetic bases on this unit increases the unit`s overall height. 21 ft Cord with Ring Terminals 16 ft Cord w/Battery Clamps Wiring: Each light comes with several cord options including a 21 foot cord with ring terminals (C-21RT), 16 foot cord with spring battery clamps (alligator clips) (C-16BC), or a 16 foot straight cord with blunt cut ends. This light can be ordered in either 12 volt or 24 volt configuration, allowing it to be used with any vehicle or ATV equipped with a cigarette plug. Choose voltage below when ordering. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDLB-200X2E-IR-M Magnetic Infrared LED Light Bar LEDLB LED Features LEDs: 200 Edixeon¨ 3 Watt LEDs Edixeon¨ 3 Watt LEDs Dimensions: 52.2"L x 5.25"H x 3.56"D LEDs Driven At 80% Weight: 50 lb -40¡C ~ +80¡C Operating Temp Range Watts: 600 Watts RoHS Compliant Voltage: 9-42 VDC 70% Lumen Retention @ 65,000 hours Spot Beam: 2600`L x 540`W LED Chip Op Temp -40¡C to +125¡C Flood Beam: 900`L x 800`W IP68 Rated Waterproof Lighting Configuration: 10¡ Spot or 35¡ Flood CE Certified Mounting: (5) 200 lb Magnets Wiring: (2) 20` 12/3 SOOW Power Cables w/ Blunt Cut Ends Amps: 50 (on 12 volts) & 25 (on 24 volts) Lumens: 36,000 Wavelength: 750 Nm, 850 Nm,or 940 Nm Infrared Special Orders- Requirements LED Life Expectancy: 50,000 hours Contact us for special requirements Optics Efficiency: 90% Toll Free: 888-325-4448 Materials: Aluminum Housing, Polycarbonate Lens Intl: 1-214-616-6180 Housing Color: Black E-mail: [email protected] -Scroll Down to Purchase-