Image coming soon

Larson Electronics Integrated Explosion Proof LED Paint Spray Booth Light - 16,000 Lumens - Battery Backup - C1D1 - T6

Larson Electronics

(No reviews yet) Write a Review
SKU:
EPL-EMG-48-4L-ITG-LED
Weight:
0.00 LBS
Call for price
Made in the USAThe Larson Electronics EPL-EMG-48-4L-ITG-LED Explosion Proof Integrated 4` 4-Lamp LED Light Fixture is NRTL Listed for United States and Canada approved Class I Division 1 & 2 and Class II Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This integrated explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.This four foot, four lamp integrated LED fixture is ideal for operators seeking a top quality explosion proof LED light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-EMG-48-4L-ITG-LED is equipped with a specially designed integrated LED assembly which produce 16,000 lumens, resulting in 50% more foot candles of illumination at 8 feet as compared to standard T5HO lamps when measured with an Extech light meter. Our integrated series are visibly brighter than standard T5HO`s and have consistently surprised many of our customers with their unexpectedly high light output levels.We now offer our first generation integrated LED tube assembly within this fixture which have increased this hazardous location light`s performance. This four lamp explosion proof LED linear fixture is lighter in weight and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T5HO bulbs. These lamps are individually dimmable via Mark 7 0-10V style dimmer switches for maximum control over illumination levels.This emergency backup LED light works, mounts and is wired like our EPL-48-4L-ITG-LED explosion proof integrated LED light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. With an integrated emergency ballast, this explosion proof LED light will continue to operate one integrated strip for 90 minutes at 2400 lumens after the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode.This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.Connector pins closeupConnector pins closeupConnector pins closeupClick Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeUnlike the glass tube design of traditional fluorescent lamps, these integrated LED fixtures have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.The quad 40 watt LED assemblies produce 50% more illumination than standard T5HO bulbs while offering lower amp draw and increased reliability. Each lamp produces 4,000 lumens at 100 lumens per watt, for a combined 16,000 total lumen light output. An EPL-48-4L-T5HO explosion proof fluorescent light, with a combined total of 216 watts, draws 1.8 amps at 120 volts AC. This LED version of the same light, with a total of 160 watts, draws only 1.34 amps at 120 volts AC. The EPL-EMG-48-4L-ITG-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.Energy Consumption ComparisonT5HO T8 LEDWattage 216 watts 128 watts 160 wattsAmp Draw @ 120V AC 1.8 amps 1.07 amps 1.34 ampsAmp Draw @ 220V AC 0.98 amps 0.58 amps 0.73 ampsAmp Draw @ 240V AC 0.9 amps 0.53 amps 0.73 ampsAmp Draw @ 277V AC 0.78 amps 0.47 amps 0.58 ampsAmp Draw @ 12V DC 18 amps 10.67 amps 13.34 ampsAmp Draw @ 24V DC 9 amps 5.34 amps 6.67 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursOperation cost per year(12hs/day @ 12c/kWh) $133.53 $67.28 $84.10Our EPL-EMG-48-4L-ITG-LED LED light fixture is NRTL Listed for United States and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Surface Mounting: Standard end mounting via Unistrut. The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion proof LED light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single junction box at one end of the light is provided for the electrical connection.Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2" NPT junction box on one end, and a 1/2" NPT bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The threaded mounting bracket provides support for the opposite end of the fixture.Suggested Applications:Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Made in USA Quality Superior LED Benefits1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for re-lamping the fixture, while some competitive models require the "tap and knock off" method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.9. Lighter weight, slimmer, brighter alternative to fluorescent configurations1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing.11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information EPL-EMG-48-4L-ITG-LED Explosion Proof LED Fixture Ratings/ApprovalsNRTL Listed for United States & Canada Class I Division 1 Groups C and D T6Dimensions: 52"-L x 22.5"-W x 8.5"-H Class I Division 2 Group A,B,C,DWeight: 130 Lbs Class II Division 1 & 2, Groups E,F,GVoltage: Universal 120-277VAC 50/60 Hz or 11-25V AC/DC NRTL Certified to UL 595 Marine Type (Saltwater)Total Watts: 80 watts NRTL Certified to UL 844Total Lumens: 16,000 NRTL Certified to UL 1598 Marine TypeLED Lamp Life Expectancy: 50,000+ Hours Certified Canadian StandardsLuminous Efficiency: 100 Lumens per Watt Listed for Paint Spray BoothsColor Temp: 5000K California Title 24 CompliantColor Rendering Index: >80 IP67 Rated - WaterproofBeam Angle: 150¡ T6 Temperature RatingPower Efficiency: 90% NEMA 4XPower Factor: >0.95 LEL Listed LED LampsAmbient Operating Temp Range:-30¡ C to +85¡C Approved for Confined SparesOperating Temp Rating: T6 Rated Silicone FreeMinimum Operating Temp: -30¡C Factory Sealed FixtureEmergency Runtime: 90 minutes 2400 Lumen Output During Emergency OperationMaximum Case Temp: +90¡C Individually Dimmable LampsHousing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Emergency Battery BackupLens Material: Hardened Borosilicate Glass Tubes Made in the USAGasket Material: Buna Rubber O-Rings Special Orders- RequirementsMounting: Unistruc Surface Standard - Pendant Optional Contact us for special requirementsWiring Hub: 1/2" NPT Toll Free: 1-800-369-6671Intl: 1-903-270-1187E-mail:[email protected]

Reviews