Larson Electronics IND-SS-48-2L-BL-UVC-SPF-V2 4ft Stainless Steel UV-C Fluorescent Fixture Shatterproof Bulbs/Glass Lens - Food Safe/Approved for Washdown

4ft Stainless Steel UV-C Fluorescent Fixture - Kills 99% of Viruses - Shatterproof Bulbs/Glass Lens - Food Safe/Approved for Washdown This unit is Made In USA - Manufactured in Texas The IND-SS-48-2L-BL-UVC-SPF-V2 from Larson Electronics is a Stainless Steel UV-C Fluorescent Light Fixture that is designed as a UV sanitation light to kill 99% of viruses, bacteria, mold, and spores. This food-safe fixture uses a special ballast and shatterproof bulb with shatterproof/UV transmitting glass lens combination to produce ultraviolet light. The stainless steel housing of the IND-SS-48-2L-BL-UVC-SPF-V2 is approved for washdown environments and is resistant to chemicals. *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores, and bacteria. Click here to learn more about UVC and the corona virus* The IND-SS-48-2L-BL-UVC-SPF-V2 fixture is a 4 foot long, 2 lamp, stainless steel UV-C fluorescent light that emits UV-C light with a wavelength of 254nm for germicidal and sanitation purposes. The 72-watt lamps are protected by an aluminum frame, hinged door secured with four turn latches, and the fixture is constructed of copper-free aluminum alloy. The lamp reflector is made out of corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. Highly resistant to chemicals, the fixture is drip proof when facing downwards. A durable FEP coating makes the bulb shatter resistant and provides protection from impacts. Should the bulb break during an emergency, the internal contents and glass will remain trapped inside the unit. The UV light is also protected by a shatterproof UV transmitting glass lens for food safe applications. Approved for washdown environments, these coatings add an extra layer of safety for workers and customers alike. This fixture, like our other UV lights, operates on 120V AC only. The IND-SS-48-2L-BL-UVC-SPF-V2 provides operators with a reliable and durable UV-C sanitation lighting solution for open areas. Distance Irradiance/Second Exposure Time Required* 6 inch 4829.76 uW/cm2 6.1 seconds 12 inch 2426.11 uW/cm2 13.6 seconds 18 inch 1347.84 uW/cm2 24.48 seconds 2 foot 872.35 uW/cm2 44.33 seconds 3 foot 456.77 uW/cm2 1.53 minutes 4 foot 230.26 uW/cm2 3.04 minutes 5 foot 147.36 uW/cm2 4.07 minutes 6 foot 102.34 uW/cm2 6.84 minutes 7 foot 75.19 uW/cm2 12.16 minutes 8 foot 57.56 uW/cm2 15.39 minutes 9 foot 45.48 uW/cm2 15.39 minutes 10 foot 36.84 uW/cm2 17.64 minutes 12 foot 25.58 uW/cm2 27.36 minutes 15 foot 16.37 uW/cm2 42.75 minutes 18 foot 11.37 uW/cm2 61.56 minutes 20 foot 9.21 uW/cm2 76 minutes 22.5 foot 7.28 uW/cm2 96.19 minutes 25 foot 5.89 uW/cm2 118.75 minutes 28 foot 4.70 uW/cm2 148.96 minutes 30 foot 4.09 uW/cm2 171.01 minutes 32.5 foot 3.49 uW/cm2 200.69 minutes 35 foot 3.01 uW/cm2 232.76 minutes 40 foot 2.30 uW/cm2 304.01 minutes *Exposure time is based off of total irradiance. The above calculations are based on 12mJ total exposure. This level of exposure deactivates most organisms. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Standard Surface Mount Brackets: Each L bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor, or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface. A sliding bracket mount is available so operators can retrofit this light fixture to use the pre-existing mounting holes from other fluorescent fixtures. The sliding mount brackets are available in the related items order section below. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Suggested Applications: UV-C sanitation and germicidal applications in hospitals, warehouses, clinics, nursing homes, food manufacturing, and more. Call 888-325-4448 to place your Larson Electronics order online today!