Image coming soon

Larson Electronics Hazardous Location Area Fluorescent Light - 2', 2 lamps - Low Voltage - Class I, Div. II

Larson Electronics

(No reviews yet) Write a Review
SKU:
HAL-24-2L-LV
Weight:
0.00 LBS
Call for price
Made in the USAThe Larson Electronics HAL-24-2L-LV Hazardous Area Fluorescent Light Fixture is Class 1 Division 2 Groups A, B, C and D - NRTL Certified to UL 1598A, has a T4A temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occassionally encountered. This low voltage unit is designed to operate on 12/24 volt current.The HAL-24-2L-LV fixture is a 2 foot long, 2 lamp, Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a good choice for use in applications where low voltage illumination is required or preferred. This fixture is T4A temperature rated and comes standard with F17-T8 bulbs. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is designed to operate on 12 or 24 volt current only and is NRTL Certified to UL 595 and UL 1598A Marine Type, for use marine environments. The HAL-24-2L-LV provides operators in hazardous locations with a compact, reliable and low voltage lighting solution for open areas where flammable chemicals and vapors my occasionally be present.Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeSurface Mount (Standard)Pendant Mount (Optional)NOTE ON LAMPS: The HAL-24-2L-LV has an electronic ballast and works only with bulbs intended for 12 or 24 Volt current.Standard Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface. Sliding bracket mounts are available in the related products section which allow operators to use existing mounting setups.?Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.Made in USA Quality Lamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. 1/2" or 3/4", threaded access hole for wiring conduit. 7. Units can be wired end to end in series. Specifications / Additional Information HAL-24-2L-LV Hazardous Area U.L. RatingsDimensions: W-7" L-25.5 " H-6 1/8 " NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Weight: 17 Lbs NRTL Certified to UL 1598A Marine TypeTotal Watts: 34 watts* Temp Rating: T4AVoltage: 12 - 24 Volts California Title 24 CompliantTotal Lumens: STD-T8 Bulbs 2,400 Class 1 Division 2, Groups A, B, C, DLamp Life Expectancy: STD-T8 Bulbs 24,000 Hours Efficiency: STD-T8 Bulbs 70 Lumens per Watt Operating Temp Range: T4A Rated -30 C to 70 CMinimum Operating Temp: -30 CMaximum Case Temp: 90 C Beam Angle: N/A Special Orders- RequirementsColor Temp: 3500K- Contact us for special requirementsMounting: Bracket Standard Toll Free: 1-800-369-6671Wiring Hub: 1/2" or 3/4" threaded Intl: 1-903-270-1187? E-mail:[email protected]*Wattage totals are lamps only and may vary with different lamps.

Reviews