Larson Electronics Hazardous Area LED Strobe Light - Chemical/Corrosion Resistant - 10 Watts - Non-Metallic - C1D2 HAL-SLED-10

Made in the USA

The HAL-SLED-10 Class 1, Division 2 Chemical Resistant LED Strobe Light from Larson Electronics is UL rated Class 1 Division 2, and produces 4 flashes per second. Water proof and IP67 rated , this LED equipped light is pendant, ceiling, or wall mounted, and available with several color and voltage options.

The powerful and durable HAL-SLED-10 explosion proof LED strobe light from Larson Electronics is ideal for industrial applications, hazardous work spaces, and areas where gases and vapors may be present and a powerful and durable strobe light solution is needed. The lamp housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globe, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This lamp can be ordered with red, blue, green, amber, and white flash colors as well as different voltages including 120/277VAC and 12/24V AC/DC.

This hazardous area LED strobe light carries a T2D temperature rating and has a -29C to 40C (-29F to 104F) operating temp range. This LED light carries UL 1570/1571 and UL 595 compliance and is waterproof and suitable for spray down areas and marine locations. Wiring is through 3/4" NPT hubs. This LED light carries UL and CSA certification, USCG acceptance, UL 1570/1571 approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas.

Click Photo to Enlarge

The 10 watt LED lamp in this unit offers exceptional power, a 50,000+ hour life span, and is protected by a Pyrex globe and polycarbonate globe guard. The LED lamp in this area light offers 1470 lumen light output. Light output with this explosion proof LED light is 20% brighter than a 100W incandescent bulb when measured with an Extech light meter at 10 feet. The unit shown is ceiling mount, and we offer pendant and wall mount versions as shown below for added installation versatility. The HAL-SLED-10 is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal and is ideal for locations where these hazardous compounds are commonly encountered.

Voltages: 120-277V AC 50/60Hz or 11-25V AC/DC
Draws 0.4A average @ 12V
120VAC draws 0.04A average.
Wiring is through 3/4" NPT hubs.

Temp Code: Class 1 T2D 215¡C¡ C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.)

Ê