Larson Electronics Golight Stryker 3006-24 Wireless Remote Control Spotlight - 24 Volt - Handheld Remote LE-3006-24

The LE-3006-24 Golight Stryker from Larson Electronics is a 65 Watt motorized spotlight that operates withÊ a handheld wireless remote control. This particular model is available in chrome and is permanently mounted . It produces a wide spot beam with an effective working beam of 700 feet and has a 6.5 million candlepower rating.

The LE-3006-24 Golight Stryker is designed for use in all weather conditions and produces 1,300 lumens of intense light output. These units feature remote control operation that allows users to rotate the light 370 degrees with a hard stop and to adjust vertical tilt through 135 degrees. Remote operation is provided by one handheld wireless remote controller that operates over a radio frequency of 433 MHz. This remote includes an internal 12 volt battery rated at 1 year of operation and a single red LED to indicate remote control activity. The remote controller has a range of up to 100 feet and will operate through walls, within structures, and in vehicles. The remote is constructed of polycarbonate with rubber push pad buttons for weatherproof durability and can be user programmed to operate one or several lights simultaneously. Remotes are 3 inches long by 2 inches wide by 3/8 inch thick.

Remote Operation: Remote control functions include on/off, and 4 buttons which control up, down, left and right movement. The light will continue movement as long as the buttons are pressed. Releasing the buttons stops movement and holds the Golight in position. A fast and slow mode button (turtle/hare) controls the speed of the motor while the pan and tilt function buttons are depressed. Holding the button for 12 seconds in fast mode results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is used for pinpoint accuracy at distance and is approximately 35 seconds for full rotation and 20 seconds for one full range of tilt.

Durability: The LE-3006-24 Golight Stryker is designed for hunting and demanding outdoor use with a weather resistant housing constructed of high quality ASA Luran thermoplastic that is heat resistant, impact resistant, UV resistant and able to withstand rugged use and abusive conditions. This particular Golight is chrome in color, making it ideal for docks and buildings where an attractive appearance is desired. Remote movement of this spotlight is provided by an automotive grade internal motor, gear, and transmission assembly that is constructed of LEXAN, brass, and stainless steel to provide rust and corrosion resistance as well as long life and reliable operation.

Mounting: The light is permanently mounted via three screws. A detachable, interlocking stainless steel mounting plate simplifies mounting. Three mounting holes secure the plate to the surface. Interlocking brackets and a machine screw at the back of the unit secures the Golight in place.Ê

Power: This light operates with 24 volts DC and draws 2.7 amps, making it ideal for vehicles, boats, ATVs, and similar sources of 24 volt direct current. On this particular model, the light ends in a 1 foot pigtail with stripped and tinned leads. The operator must provide wiring from the battery and/or fuse box to the light. 16 AWG wire is recommended.Ê

Light Output: The lamp in this Golight Stryker is aÊ65 watt Halogen Cr5 Pentabeam II bulb which produces 1,300 lumens. This bulb is paired with a tight focusÊspot beam opticsÊto produce a spot beam 700 feet in length. This lamp has a 6000K color temperature, giving it very good color rendering and contrasting properties and the ability to clearly and sharply illuminate objects at long distances. This beam is effective to the far end of its reach, producing enough illumination to read a book at 700 feet.

This high power Golight Stryker is ideal for hunting, security, boating, law enforcement, emergency services, utilities, and anywhere high power and remote control functionality are desired.

Note On Voltage: Most vehicles are 12 Volt DC. 24 Volts DOES NOT mean more power. Running a 24V light from a 12V power source will result in a very dim or non-functioning light and may cause internal damage to the light as well. For common vehicle use, please order 12V.Ê