Larson Electronics Explosion Proof Ultraviolet Paint Spray Booth Light on Dolly Cart w/ Wheels - 4f 2 lamp - 100ft Cord

Made in TexasThe Larson Electronics EPLCD-48-2L-UV-100 Explosion Proof Paint Spray Booth Ultraviolet Light on Dolly Cart is U.S./Canada listed Class 1 Division 1, Class II Division 1 and offers a versatile lighting solution for applications requiring exceptional work area lighting coverage.***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The EPLCD-48-2L-UV-100 UV dolly cart mounted explosion proof light is UL listed Class 1 Division 1 and Class II Division 1 & 2 and offers operators the ability to quickly and easily add a full power light wherever it is needed. This unit incorporates a Larson Electronics EPL-48-2L-UV explosion proof fixture that emits light in the ultraviolet spectrum into a mobile dolly cart style platform. This configuration allows operators to wheel this light fixture into position next to the target or lay it flat to provide illumination beneath the target.This explosion proof light and dolly cart offers an excellent lighting solution for operators who need illumination in unusual areas where traditional fixed mount lighting is obstructed or cannot effectively reach. Ultraviolet Wavelength Options:Ultraviolet A Wavelength produces a longer wave between the 400nm - 315nm spectrum.Ultraviolet B Wavelength produces a shorter wave than the UVA wavelength. These medium sized waves range from 315nm - 280nm.Ultraviolet C wavelength is reduced exceptionally. Some refer to this wave as the `germicidal` wave. The Ultraviolet C Wavelength ranges from 280nm - 100nm. The light fixture used in the EPLCD-48-2L-UV-100 is T6 rated and produces 10,000 lumens of light using two 40 watt ultraviolet fluorescent bulbs. The lamps are protected by heat and impact resistant Pyrex tubes and an additional plexiglass lens which provides added protection from impacts and overspray. The light fixture is constructed of copper free aluminum alloy and the lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This unit is listed for use in paint spray booths, is universal voltage 120-277V AC 50/60 Hz, and also available in optional 12-24V DC or 347-480 Volt versions.Click Photos to Enlarge5-15 Straight Blade Plug 5-20 Straight Blade Plug6-20 Straight Blade Plug Wiring & Plug: The EPLCD-48-2L-UV-100 portable explosion proof ultraviolet light fixture is U.S. and Canada approved for use in paint spray booths. This fixture is equipped with 100` of 16/3 chemical and abrasion resistant SOOW cable terminated in an explosion proof cord cap. Plug options include explosion proof 5-15 15 amp straight blade plug, explosion proof 5-20 20 amp straight blade plug, or explosion proof 6-20 20 amp straight blade plug. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.NOTE ON LAMPS: We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. We standardize on the T-5HO bulbs mostly for their longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very cold conditions and T-12HO bulbs operate well in those environments. The T12VHO, 110 watt Very High Output lamps make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.Made in USA QualityLamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Dolly cart mounting provides versatility and allows the unit to be positioned for optimal light coverage of the work area. 3. Light fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Pyrex tubes, a wire mesh guard, and replaceable Plexiglas lens protects fixture from overspray and random impacts. 8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.Lamp options for UV fixtures are determined by UV range.Operators can specify when ordering- UVA (-A suffix), and UVB,(-B suffix) UVC (-C suffix).T8 bulbs designed for UV applications are used. The bulb and ballast in our UV fluorescent fixtures are unique to UV applications.UVA(-A) 400nm - 315nmUVB (-B) 315nm - 280nmUVC (-C) 280nm - 100nmSpecifications / Additional Information EPLCD-48-2L-UV-100 Explosion Proof Light FixtureRatings/ApprovalsListing: United States - CanadaClass I Division 1, Groups C and D T6Lamp Type: FluorescentClass I Division 1, Groups C and D T6Dimensions: W-22" L-58" H-24"Class II, Division 1 & 2, Groups E,F,GTotal Unit Weight: 80 LbsUL 595 Marine Type (Saltwater)Voltage: Universal 120-277VAC 50/60 HzUL 844Optional Voltage: 12 VDC, 24 VDC, 347 Volts, 480 VoltsUL 1598 Marine TypeTotal Watts: 80WCertified Canadian StandardsTotal Intensity: 16.2WListed for Paint Spray BoothsLamp Life Expectancy (Hrs): 5,000 ABS CertifiedLuminous Efficiency): 202.5 mW/WCalifornia Title 24 CompliantLamp Color: UV-A, UV-B, or UV-C(T12HO)IP67 Rated - WaterproofBeam Angle: 150¡T6 Temperature RatingAmbient Operating Temp Range: -20¡C to +70¡C NEMA 4XOperating Temp Rating: T6 RatedApproved for Confined SparesMinimum Operating Temp: -30¡C Maximum Case Temp: +90¡C Lamp Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Lamp Lens Material: Hardened Borosilicate Glass Tubes Lamp Gasket Material: Buna Rubber O-Rings Cart Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Cart Finish: Powder Coated - BlueSpecial Orders- RequirementsMounting: Portable Dolly Cart with WheelsContact us for special requirements Wiring: 100` SOOW Cord Terminated w/ an Explosion Proof Straight Blade PlugCord Cap:5-15, 5-20, or 6-20 Straight Blade PlugToll Free: 888-325-4448U.L Approval: U.S Certificate Canada CertificateFax: 1-903-498-3364Warranty: Yes - 5 Years*E-mail: [email protected] Scroll Down to Purchase-