Larson Electronics Explosion Proof Strobe Light - 80 Flashes Per Minute - Class 1 Division 1 - IP67

Made in the USA The EPSL-80 Explosion Proof Strobe Light from Larson Electronics is UL rated Class 1 Division 1, Groups C, D, paint spray both approved, and produces 60-80 red flashes per minute. Water proof and IP67 rated , this Xenon Strobe equipped light is pendant mounted and available with several color and voltage options. The powerful and durable EPSL-80 explosion proof strobe light is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and a powerful and durable strobe light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with red, blue, green, amber, purple and white flash colors as well as different voltages including 120 Volts 60hz AC, 240 Volts AC, 24 Volts DC, and 12 Volts DC. This hazardous area strobe light carries a T3C temperature rating and is approved Class 1, Divisions 1 & 2, Groups C and D, Class 2, Divisions 1 & 2, Groups E and F, and Class 3, Divisions 1 & 2. This strobe light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through a 3/4" hub. The spring loaded lamp socket is a medium base glazed porcelain design with heavy gauge nickel plated copper components and the socket leads pass through sealing compound that separates the lamp chamber from the wiring compartment. The bulb and socket assembly is protected by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control. The Xenon bulb in this strobe light offers a 10,000 hour lifespan and 1.75 joules/flash at 50 candela. This unit can be ordered in flash configuration which produces 60-80 flashes per minute, or a steady ON configuration for low level general illumination. Voltages: 12–80VDC draws 0.4A average @ 12VDC tapering to 0.05A average @ 80VDC.16–24VAC draws 0.35A average.120VAC draws 0.04A average. Temp Code: Class 1 T2C 230¡ C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.) Specifications / Additional Information EPSL-80 Strobe Ratings/Approvals Lamp Type: XENON Class 1, Groups C and D Lamp Dimensions: 7.25"-Wide, 15" Height Class 2, Groups E and F Voltage: 120 Volts 60hz AC, 240 Volts AC, 24 Volts DC, and 12 Volts DC Class 3, Groups E, F and G Lamp Colors: Red, Green, Blue, Amber, or White IP67 (water proof) Lighting Configuration: Strobing Beacon or Steady On Suitable for Paint Spray Booths Candela: 50 T3C Temperature Rating Strobe Count: 60-80 Per Minute Listed for USA and Canada Power Supply Output: 2.7 Watts 2.3 joules per flash Lamp Life: 10,000 Hours Special Orders- Requirements Mounting: Wall, Ceiling, or Pendant Contact us for special requirements Wiring: 3/4" Threaded Hub Toll Free: 888-325-4448 Lamp Weight: 9 lbs Fax: 1-903-498-3364 Temp Rating: T3C E-mail: [email protected] Down to Purchase