Larson Electronics Explosion Proof Panelboard - 120/240 AC - 50A Main Breaker - (3) 20A 1P (1) 30A 1P Branch Breakers

The EPPB-1P-120.240-50AMB-2X20A.1P-1X30A.1P.GFI-8X0.75NW is an Explosion Proof Panelboard with Class I, II, III and Class I, Zones 1 & 2 combustible ratings. This 50-amp main breaker panelboard is setup for 120/240V single-phase primary voltage, with a 1-pole 3-wire configuration. Constructed using copper-free aluminum, the NEMA rated unit is equipped with branch breakers and a total of eight, 3/4" NPT taps at the (4) top and (4) bottom of the panelboard. The EPPB-1P-120.240-50AMB-2X20A.1P-1X30A.1P.GFI-8X0.75NW is suitable for power distribution and circuit protection in flammable environments. This unit features a primary voltage of 120/240V single phase and a 50-amp main breaker panel. Taking on a 1-pole 3-wire configuration, the explosion proof panelboard consists of one, 30-amp 1-pole and three, 20-amp 1-pole branch breakers. Four empty spaces inside the unit are available for adding spare breakers. This explosion proof panelboard is constructed of copper-free aluminum. The NEMA-rated panelboard is approved with the following explosion proof ratings: Class I, Groups B, C, D; Class I, Zones 1 & 2; Class II, Groups E, F, G; and Class III. This unit can be mounted on flat surfaces during installation. Operators are provided access to eight, 3/4" NPT taps at the (4) top and (4) bottom of the lighting panelboard. Applications: Industrial facilities, hazardous locations, offshore refineries, marine locations, indoor/outdoor spaces, agricultural sites, ship yards, docks and more. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information EPPB-1P-120.240-50AMB-2X20A.1P-1X30A.1P.GFI-8X0.75NW Explosion Proof Panelboard Ratings Type: Explosion Proof Lighting Panelboard Class I Groups B, C, D Primary Voltage: 120/240V 1PH Class II Groups E, F G Main Panel Amp Rating: 50A Main Breaker Class III Configuration: 1 Pole 3 Wire Class I Zones 1&2, Groups llB+H2, IIA Branches: (1) 30A 1P, (3) 20A 1P Breakers NEMA 3, 4, 4x, 7 (B, C, D) 9 (E, F, G) Branch Poles: 12 Empty Spaces: 4 Materials: Copper Free Aluminum Special Orders- Requirements Finish: Aluminum Lacquer Paint Contact us for special requirements Mount: Surface Toll Free: 888-325-4448 Hubs: (8) 3/4" NPT Intl: 1-214-616-6180 Hub Locations: (4) Top, (4) Bottom E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*