Larson Electronics Explosion Proof Panel Board - Class I, II, III - 120-240V 1PH - 100A, MLO - (5) Breakers - NEMA

The EPPB-1P-120.240-4X20A.1P-1X30A.2P is an Explosion Proof Panel Board that is designed for hazardous locations and industrial facilities. This 12-circuit panel board is compatible with 120/240V single phase and has a 3-wire configuration. The 100-amp main lug only unit is equipped with one 30-amp 2-pole and four 20-amp single pole breakers. The EPPB-1P-120.240-4X20A.1P-1X30A.2P is suitable for circuit protection in hazardous locations. Taking on a 3-wire configuration, the main lug only unit features a 100-amp rating. This panel board contains a primary voltage of 120/240V single phase and 12 circuits. One 30-amp 2-pole breaker and four 20-amp 1-pole breakers can be found inside the explosion proof board. The explosion proof panel board is constructed of copper-free aluminum, with 316 stainless steel hardware. The top-feed explosion proof unit can be mounted on flat surfaces or walls. Hubs: The NEMA-rated panel board contains (1) 1" NPT hub at the top, as well as (6) 1" NPT hubs and (1) 1/2" NPT hub at the bottom of the explosion proof enclosure. Applications: Industrial facilities, hazardous locations, offshore refineries, marine locations, indoor/outdoor spaces, agricultural sites, ship yards, docks and more. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information EPPB-1P-120.240-4X20A.1P-1X30A.2P Explosion Proof Panel Board Ratings/Approvals Unit Type: Explosion Proof Panel Board Class I, Division 1&2 Groups B,C,D Dimensions: 23.31" x 17.31" x 11.13" Class II, Division 1 Groups E,F,G Weight: 160 lbs Class II, Division 2 Groups F,G Primary Voltage: 120/240V 1PH Class III Main Lug Only Amp Rating: 100A NEMA 7/9 Configuration: 3 Wire Circuits: 12 Branch Breakers: (1) 30A 2P, (4) 20A 1P Special Orders- Requirements Materials: Copper-free Aluminum, 316 SS Contact us for special requirements Mount: Surface/Wall Phone: 1-214-616-6180 Hub Quantity: 8 Toll Free: 888-325-4448 Hubs: (1) 1" NPT @ Top, (6) 1" NPT @ Bottom, (1) 1/2" NPT @ Bottom for Breather/Drain Fax: 1-903-498-3364 Power Entry: Top Feed E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*