Larson Electronics Explosion Proof Light - Waterproof Fluorescent Light Fixture - Paint Spray Booth, Rigs - 4 foot, 2 l - 50ft 16/3 SOOW EXP Cord Cap

Made in the USAThe Larson Electronics EPL-48-2L-EYM-50C-EPP Explosion Proof Fluorescent Light Fixture is NRTL Listed for United States & Canada, Class 1 Division 1 and Class 1 Division 2 for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The unit carries a T6 temperature rating, is approved for Paint Spray Booths, and comes with 50 feet of 16/3 SOOW cord with an explosion proof cord cap.The EPL-48-2L-EYM-50C-EPP fixture is a 4 foot long, 2 lamp, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with two fluorescent lamps. Lamp choices include T5HO, T12HO, and T8. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.This fixture is multi-voltage capable and is available with a variety of lamp options. The EPL-48-2L-EYM-50C-EPP provides operators in hazardous locations with a reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-5HO bulbs mostly for longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very cold conditions, and T-12HO bulbs operate well in those environments. Larson Electronics offers a T12VHO lamp option, 110 watt Very High Output lamps make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications. ? T5HO T8 LEDWattage 108 watts 64 watts 48 wattsAmp Draw @ 120V AC 0.9 amps 0.54 amps 0.4 ampsAmp Draw @ 277V AC 0.39 amps 0.24 amps 0.18 ampsAmp Draw @ 12V DC 9 amps 5.34 amps 4 ampsAmp Draw @ 24V DC 4.5 amps 2.67 amps 2 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursColor Temperature 5000K / 4100K 4100K 5300KOperation cost per year(8hs/day @ 11c/kWh) $34.69 $20.56 $15.42Click Photos to Enlarge5-15 Straight Blade Plug5-20 Straight Blade Plug6-20 Straight Blade PlugWiring & Plug: This explosion proof flood light is equipped with 50 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur.Click here to see the LED version of this fixtureMounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Surface Mount (Standard)Click Photo to EnlargeClick Photo to EnlargeClick Photo to Enlarge?Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.Made in USA Quality Lamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 (Suffix –50KT5)F54-T5/841/HO - 54 watt, 5000 lumens per bulb, 20,000 hours life, 4100 Kelvin color, CRI 85 (Suffix -41KT5)F48-T12/HO – 60 watt, 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color (Suffix –T12HO)F32-T8/841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8)F36-T8/841 – 36 watt, 3350 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8)T12HB with magnetic ballast for high heat configurations ("hot box" explosion proof light applications) - 60 watt, 4050 lumens per bulbs - This bulb, ballast and wiring configuration is designed for applications to 165 degrees C. Specifications / Additional Information EPL-48-2L-EYM-50C-EPP Explosion Proof Ratings/ApprovalsDimensions: W-11.25" x L-52" x H-8.5 " Class I Division 1, Groups C and D T6Weight: 65 Lbs Class I Division 2, Group A,B,C,DVoltage: Universal 120-277VAC 50/60 Hz Class II, Division 1 & 2, Groups E,F,GTotal Watts: 108W (T5HO, 64W or 72W (T8), 120W (T12HO) NRTL Certified to UL 595 Marine Type (Saltwater)Total Lumens: 10,000 (T5HO), 5,900 (T8), 8,100 (T12HO) NRTL Certified to UL 844Lamp Life Expectancy (Hrs): 20,000 (T5HO), 24,000 (T8), 12,000 (T12HO) NRTL Certified to UL 1598 Marine TypeLuminous Efficiency (Lm/W): 95.59 (T5HO), 92.19 (T8), 67.5 (T12HO) Certified Canadian StandardsColor Temp: 5000K (T5HO/T8), 41000K (T5HO/T8), 4000K (T12HO), 3000K (T8) Listed for Paint Spray BoothsBeam Angle: 150¡ ABS CertifiedAmbient Operating Temp Range: -20¡C to +70¡C California Title 24 CompliantOperating Temp Rating: T6 Rated IP67 Rated - WaterproofMinimum Operating Temp: -30¡C T6 Temperature RatingMaximum Case Temp: +90¡C NEMA 4XHousing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Approved for Confined SparesLens Material: Hardened Borosilicate Glass Tubes Special Orders- RequirementsGasket Material: Buna Rubber O-Rings Contact us for special requirementsMounting: Surface Standard Phone: 1-214-616-6180Wiring Hub: 1/2" NPT Toll Free: 888-325-4448Cord Length: 50' 16/3 SOOW Cord Cap: 5-15, 5-20 and 6-20 Straight Blade Plug Fax: 1-903-498-3364E-mail: [email protected]*Temperatures above +65¡ C will diminish ballast life from 5 years to 3 years