Larson Electronics Explosion Proof Incandescent HAND LAMP ONLY - 100/60 Watts - Class I & II - 220Volts, 50Hz

Made in the USA HAND LAMP ONLY - 220 Volts - This unit does not ship with cord or plug. The Larson Electronics EPL-220-DW Explosion Proof Hand Lamp is UL Listed Class 1 Division 1 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection. The EPL-220-DW explosion proof drop light housing is constructed of aluminum with a rubber bumper guard designed to provide an effective lighting solution for operators requiring a versatile source of illumination. This hazardous location hand lamp is Class 1, Division 1 approved when equipped with a 100 watt bulb and Class 2 Division 1 approved when equipped with a 60 watt bulb. This explosion proof drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. Dark 40` Container Illuminated with EPL-220-25 Click Photos to Enlarge Click Photos to Enlarge This 60 or 100 watt drop light is suitable for use in areas where petrochemical vapors (100 watt) and various dusts (60 watt) are present. This unit is rated Class 1, Division 1, Class 2 Division 1. This explosion proof hand light operates standard on 220 Volt 50/60Hz VAC current. This unit is available with either a 100 watt bulb for Class 1 Division 1 operation (Gases Vapors) or a 60 watt bulb for Class 2 division 1 operations (Dusts). Choose your bulb type below when ordering. Made in USA Quality Lamp Features 1. Explosion Proof.2. 60 or 100 Watt Lamp.3. Rugged fabricated steel and cast aluminum construction.4. Red and Gray paint finish.5. UL Class1 Div1 Class 2 Div16. 220 Volt Operation7. Hook for Convenient Placement. Rubber bumper GuardNon-sparking aluminum housing220 VAC operation Aluminum lamp guardLamp shield prevent shatteringPlugs into standard outlets Swivel hook for hanging and hands free operation Specifications / Additional Information EPL-220-25 NTRL Listings UL Listing: United States Class 1, Division 1 Groups C, D (100 watt) Dimensions: L-16.5 " Dia-5" Class 2, Division 1 Groups F, G (60 watt) Total Watts: 100 or 60 watts Conforms to UL standard 781 Voltage: Stnd-220VAC 50/60Hz CSA C22.2 No. 12 and CSAC22.2 No. 137 Mounting: Hook Wiring: N/A Lamp Type:: Incandescent Ambient Temp:: 40 degrees C maximum Operating Temp:: 160 degrees C (T3C) Class 1 & 2 Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. Click here to view the Explosion Proof Light Design Description E-mail: [email protected] Scroll Down to Purchase- Same Day Shipping on This Light!