Larson Electronics Explosion Proof Hand Lamp with Cord Reel - 100/60 Watt - 120V AC - 50 Foot SOOW Cord - Class 1 & 2

Made in TexasThe Larson Electronics EPL-120-50-HR Explosion Proof Hand Lamp and Explosion Proof Cord Reel are both UL Listed Class 1 Division 1 Groups C and D and is ideal for general work activities in hazardous locations requiring explosion proof protection.***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** This explosion proof work light from Larson Electronics comes complete with an explosion proof cord reel. Cord reel contains 50 feet of SOOW cord. The EPL-120-50-HR drop light housing is constructed of aluminum with a rubber bumper guard designed to provide an effective lighting solution for operators requiring a versatile source of illumination. This hazardous location hand lamp is Class 1, Division 1 approved when equipped with a 100 watt bulb and Class 2 Division 1 approved when equipped with a 60 watt bulb. This explosion proof drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. The non sparking reel contains this unit’s 50` of SOOW Cord for convenient cord management. This explosion proof reel and LED hand lamp can be installed and used within the hazardous location area, making it ideal for hazardous work areas where a ready source of easily managed lighting is desired. Dark 40` Container Click Photos to Enlarge Illuminated with EPL-120-50 This 60 or 100 watt drop light is suitable for use in areas where petrochemical vapors (100 watt) and various dusts (60 watt) are present. This unit is rated Class 1, Division 1, Class 2 Division 1 and comes complete with 50’ of SOOW 16/3 AWG cord terminating within the explosion proof cord reel.This explosion proof hand light operates on standard 120 Volts. This unit is available with either a 100 watt bulb for Class 1 Division 1 operation (Gases Vapors) or a 60 watt bulb for Class 2 Division 1 operations (Dusts). Choose your bulb type below when ordering. Made in USA QualityLamp Features1. Federal Spec Cord.2. Explosion Proof.3. 60 or 100 Watt Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Red and Gray paint finish.6. UL Class1 Div1 Class 2 Div17. 120 Volt Operation8. 50` SOOW cable.9. Hook for Convenient Placement.10. Explosion Proof Cord Reel11.Spring activated reel ratchet12. 4-roller adjustable cable guide13. NTRL Listing (Cord Reel) - Class I, Division 1 & 2 Group D; Class II, Group G.14. NTRL Listing (Cord Reel) - Class I, Zone 1, AEx d IIB.Rubber bumper GuardNon-sparking aluminum housing120 VAC operation Aluminum lamp guardLamp shield prevent shatteringPlugs into standard outlets Swivel hook for hanging and hands free operationExplosion proof cordBuilt to UL 508 table 36.1 / NEC Standards Indoor or outdoor use Gray epoxy finish on steel partsSpecifications / Additional Information EPL-120-50-HRU.L./CSA ApprovalsUL Listing: United States Class 1, Division 1 Groups C, D (100 watt) Dimensions: L-16.5 " Dia-5"Class 2, Division 1 Groups F, G (60 watt)Total Watts: 100 or 60 wattsConforms to UL standard 781 Voltage: Stnd-120VAC CSA C22.2 No. 12 and CSAC22.2 No. 137 Mounting: HookReel - UL Listed E193373Wiring: 50` SOOW Cord w/ Explosion Proof ReelReel - Class I, Zone 1, AEx d IIB.Lamp Type:: IncandescentMade in the USAOperating Temp:: 160 degrees C (T3C) Class 1 & 2Ambient Temp:: 40 degrees C maximum Special Orders- RequirementsYOU CAN RENT THIS UNIT. CONTACT 888-325-4448.Contact us for special requirements Click here to view the Explosion Proof Light Design Description Toll Free: 888-325-4448This fixture is being remanufactured with cord reel under file number E193373.Intl: 1-903-270-1187E-mail: [email protected] Scroll Down to Purchase-