Larson Electronics Explosion Proof GFI - 20 Amp EXP Outlet - Hard Wired Unit

Made in the USA The Larson Electronics EPEXC-GFI-20O Explosion Proof GFI Outlet is Class 1 Division 1 and Class 2 Division 1 approved and allows operators to connect lights and equipment into a GFCI protected outlet. This GFCI outlet is ideal for extending electrical power within hazardous environments when hard piped outlets are not readily available. The EPEXC-GFI-20O Explosion Proof GFCI protected outlet allows operators to safely operate their explosion proof lights or equipment within the boundaries of the hazardous work area. These units are rated at 20 amps of continuous service. The GFCI protected explosion proof receptacle on this unit is of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. Each receptacle`s contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles. The ground fault circuit interrupter (GFCI) protects against possible injury from unwanted ground faults. This GFCI monitors the amount of current flowing through the unit, and provides immediate identification of faults by tripping the circuit when an imbalance is detected. Both the GFCI and outlet are factory sealed, enclosing any potentially arcing components within the copper free aluminum bodies. Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R, or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hind™ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangeability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-GFI-20O-100 Explosion Proof GFI Cord Whip Features Amp Rating: 20A Continuous Service UL Listed Dimensions: Class 1 Div 1 Groups C and D Weight Class 2 Div 1 Groups E, F and G Wiring: N/A 20 Amp EXP Twist Lock Outlet Materials: Non-Sparking aluminum, stainless steel Provides GFCI Protected Connections Receptacle Specs: In-line Receptacle Configuration: 3 Pole 2 Wire Materials: Copper Free Aluminum Mating Plugs: ****EPP-15A, EPP-20-A**** Finish: Epoxy Powder Coat GFCI Specs: Ground Fault Circuit Interrupter Special Orders- Requirements Configuration: Feed-thru Contact us for special requirements Materials: Copper Free Aluminum Toll Free: 888-325-4448 Trip Setting: 5 milliampere Fax: 1-903-498-3364 U.L. Certification E-mail: [email protected]