Larson Electronics Explosion Proof Emergency LED Light - Class 1, Class 2 Div 1 - Paint Spray Booth Cert - 2nd Gen LEDs

Made in the USAThe Larson Electronics EPL-EMG-24-2L-LED-G2 Explosion Proof Emergency LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1 & 2, Class II Division 1 & 2, has a T6 temperature rating and is a superior lighting solution for areas where flammable chemical/petrochemical vapors or pulverized dust exist or have the potential to exist.This 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs.The EPL-EMG-24-2L-LED-G2 is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 30% more illumination at 8 feet distance as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long T17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as standard T8 bulbs.With an integrated emergency ballast, this explosion proof LED light will continue to illuminate one bulb at for 90 minutes at 1470 lumens once the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged.This fixture carries a T6 temperature rating and is Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G.Click Here to EnlargeClick Here to EnlargeClick Here to EnlargeThe solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 15 watt LED lamps produce more illumination than standard T8 bulbs. The LED bulbs used in this fixture are our new second generation LED T series 15 watt T17 style lamps which produce 30% more light than standard T8 bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our EPL-24-2L-LED LED light fixture is NRTL Listed for United States and Canada for use in paint spray booths.Click here for dimensional drawings for this explosion proof light.Additional mounting options:Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).Click Photo to EnlargeClick Photo to EnlargeStandard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top of the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The pictures shown above illustrate the side brackets. The third picture enlarged below also shows the brackets at the both ends of the light.Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.Made in USA Quality Superior LED Benefits1. Each unit dialectrically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap. 7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety.15. California Title 24 Compliant Specifications / Additional Information EPL-EMG-24-2L-LED-G2 Explosion Proof RatingsNRTL Listed for United States & Canada Class 1 Division 1, Groups C and DLamp Type: LED Class 1 Division 2, Group A,B,C,DDimensions: W-11.25" L-27.5" H-8.5 " Class II, Division 1& 2, Groups E, F GWeight: 32 Lbs NRTL Certified to UL 844, 924Voltage: Universal 120/277V 50/60Hz NRTL Certified to UL 1598 Marine TypeLow Voltage (Optional): 12-24V DC NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Total Watts: 30 watts ?Total Lumens: 2,280 Luminous Efficacy: 98 Lumens per Watt LED Lamp Life Expectancy: 50,000+ Hours Color Temp: 5300K Color Rendering Index: >75 CRI Beam Angle: 150¡ Lighting Configuration: Flood Pattern Ambient Operating Temp Range:-30¡ C to 70¡ C Operating Temp Range: T6 rated Mounting: Bracket Standard - Pendant Optional Special Orders- RequirementsWiring Hub: 1/2 inch threaded Contact us for special requirementsToll Free: 888-325-4448Intl: 1-903-270-1187E-mail: [email protected]