Larson Electronics Explosion Proof 5 Outlet Extension Cord - Five 20 Amp Outlets - 100' SOOW Chemical Resistant Cord

Made in the USA The EPEXC-5X-100 from Larson Electronis is a 100 Foot Long Explosion Proof Extension Cord with Five Explosion Proof Receptacles. Class 1 Division 1 and Class 2 Division 1 approved. The Larson Electronics EPEXC-5X-100 Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 100 feet of 12/3 SOOW explosion proof cord and are rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with five inline, 20 amp, 2-pole 3-wire explosion proof receptacles installed on one end and a standard explosion proof plug installed on the other end. This unit enables multiple connections from a single cord. We offer this unit in a 120V or 250V configuration. Each receptacle`s contacts are deep recessed to avoid accidental contact and will accept standard explosion proof plugs that are NEMA 5-20R (120V) or 6-20R (250V) compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles. The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R, or 6-20R). The included plugs and receptacles are cross-interchangeable with Crouse Hind™ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-5X-100 Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating: 20 amp Continuous Service Class 1 Div 1 Groups C and D Dimensions: Cord-100 Feet Plug-2.78"-L 1.75"-W Class 2 Div 1 Groups F and G Cable: 100ft 12/3 SOOW Cable Cord Cap: NEMA 5-20 (120V) or NEMA 6-20 (250V) Configuration: 2 Pole 3 Wire Receptacle Specs: 5 Inline Receptacles Receptacle Configuration: 5-15/5-20 or 6-15/6-20 Outlets Voltage: 120V or 250V Materials: Copper Free Aluminum Special Orders- Requirements Dims:- Single Receptacle-3"-W X 5.69"-D X6.13"-H Contact us for special requirements Mating Plugs: ****EPP-15A, EPP-20A**** Toll Free: 888-325-4448 Finish: Epoxy Powder Coat Fax: 1-903-498-3364 U.L. Certification E-mail: [email protected]