Larson Electronics Explosion Proof 25' Single Phase Extension Cord - 30 Amp Continuous Service - General Area Use Plug

Made in the USA The Larson Electronics EPEXC-25-30A-10.4-GAP Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords into the boundaries of the hazardous work area. This extension cord is equipped with a general area use industrial cord cap for plugging into standard wall outlets, and an explosion proof receptacle for connecting explosion proof equipment within the hazardous environment. These units are constructed of 25 feet of 10/3 SOOW explosion proof cord and are rated at 30 amps of continuous service. The cord is chemical and abrasion resistant and comes with a 30 amp explosion proof receptacle installed on one end and an industrial grade plug installed on the other end. The explosion proof receptacles on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact caake place. To ensure the highest safety, operators should make connections outside of the hazardous area. Inter-Compatibility: The included explosion proof plug and receptacle are cross-interchangeable with Crouse Hind™ and Hubble-Killiark plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Click Photos to Enlarge L5-30 Twist Lock Plug30 Amp / 125V Rated L6-30 Twist Lock Plug30 Amp / 250V Rated Wiring and Plug: This explosion proof extension cord is equipped with 25 foot of 10/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-30 30 amp straight blade plug for 110V wall outlets with ground, standard 6-30 30 amp straight blade plug for 220-230V wall outlets with ground, NEMA L5-30 30 amp twist lock plug for 125V twist lock outlets, or NEMA L6-30 30 amp twist lock plug for 230V twist lock outlets. Please note: Electrical connections must be made OUTSIDE the hazardous environment. The cord caps on this extension cord are NOT class rated. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-25-30A-10.4-GAP Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating: 30 amp Continuous Service Class 1 Div 1 Groups C and D Cord Length: 25 Feet 10/3 SOOW Class 2 Div 1 Groups F and G Configuration: 2 Pole 3 Wire - Single Phase General Area Industrial Cord Cap Receptacle Specs: Configuration: 2 Pole 3 Wire - Single Phase Voltage:125V/230V Materials: Copper Free Aluminum Mating Plugs: EPP-30A-125.230V Special Orders- Requirements Finish: Epoxy Powder Coat Contact us for special requirements Gen App Cord Cap: 5-30, 6-30, L5-30, L6-30 Toll Free: 888-325-4448 U.L. Certification Fax: 1-903-498-3364 E-mail: [email protected]