Larson Electronics Explosion Proof 10 Foot SOOW Extension Cord - 20 amp continuous service - 12/3 SOOW

Made in the USALarson Electronics 10` Explosion Proof 20 Amp Extension CordThe Larson Electronics EPEXC-10-12-3-20A Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 10 feet of 12/3 SOOW explosion proof cord rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof receptacle installed on one end and an explosion proof plug installed on the other end. We also include an extra matching plug for operators to attach to their equipment which allows them to avoid any issues with plug and receptacle equipment compatibility with this cord.The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area.Click Photos to EnlargeThese explosion proof extension cords are preconfigured in 125V (left) or 250V (right). Each unit is equipped with a 20 amp explosion proof cord cap and rated for 20 amps of continual service. The outlets are a twistlock design. The deep recessed contacts in the receptacle housing prevents ordinary and wet location plugs from activating the explosion proof outlets.125V 5-20P Explosion Proof Straight Blade Plug250V 6-20P Explosion Proof Straight Blade Plug125V 5-15/20 Explosion Proof OutletOutlet accepts 15A and 20A Explosion Proof PlugsOutlet accepts 6-15P and 6-20P Explosion Proof PlugsInter-Compatibility: The plugs on these cords will work with non-explosion proof standard receptacles (NEMA 5-15R, 5-20R, or 6-20R) and standard wall outlets, however, they must be used with explosion proof rated outlets to retain their explosion proof rating. The included plugs and receptacle are cross-interchangeable with Crouse Hind™ part# ENPENP5151 plugs and receptacles, Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles, and Appleton U-Line¨ ECP-2023 plugs and EFS150-2023 receptacles . Any equipment requiring these plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness.Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present.EPEXC-10-12-3-20A Explosion Proof Extension Cord Plug / Outlet CertificationsAmp Rating: 20 amp Continuous Service Class 1 Div 1 Groups C and DDimensions: Cord length-10 Feet Plug-2.78"-L 1.75"-W Class 2 Div 1 Groups F and GConfiguration: 2 Pole 3 Wire Suitable Plug Cable Diameter: .538” to .639” Receptacle Specs: Voltage: 125V AC @ 20 amps Configuration: 2 Pole 3 Wire Materials: Copper Free Aluminum Dimensions: 3"-W X 5.69"-D X6.13"-H Mating Plugs: ****EPP-15A, EPP-20-A**** Special Orders- RequirementsFinish: Epoxy Powder Coat Contact us for special requirementsToll Free: 888-325-4448U.L. Certification Fax: 1-903-498-3364E-mail: [email protected]