Larson Electronics Compact 7 Watt LED Fixture for Hazardous Area Location Lighting - Aluminum Housing - 12-24VDC - C1D2 - 25' 16/3 SOOW w/ EXP Cord Cap

Buy American CompliantThe Larson Electronics HAL-7W-LED-25C-X12V-5C-EPP is a low voltage hazardous area lighting solution approved for Class 1 Division 2 Environments and 1598 compliant for use in wet locations. This powerful LED light produces 587 lumens, is equipped with an inline explosion proof transformer and explosion proof plug, and is available in a variety of configurations to allow tailoring to the specific requirements of various applications.The HAL-7W-LED-25C-X12V-5C-EPP is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. This low voltage explosion proof light can be operates on 120-240V AC 50/60 hz and is stepped down to 12V DC via an explosion proof inline transformer. This light is constructed of precision machined aluminum for excellent strength and durability and is rated IP66 for ingress protection against direct exposure to high pressure water spray.The HAL-7W-LED-25C-X12V-5C-EPP is available in a 30 degree spotlight beam configuration for distance and a 120 degree configuration for wide area illumination, and a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps.Click Photo to EnlargeClick Photo to Enlarge Click Photo to Enlarge Durability: The HAL-7W-LED-25C-X12V-5C-EPP hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wet conditions are commonly encountered.High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight configuration for long beam length or 120 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a higher light output than similar fixtures equipped with thicker glass lenses. The HAL-7W-LED-25C-X12V-5C-EPP has multiple color temperature options and is offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80. Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The mounting yoke is predrilled with two _ inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where space is limited and a heavy fixture cannot be installed due to lack of support.Click Photos to Enlarge5-15 Straight Blade Plug5-20 Straight Blade Plug6-20 Straight Blade PlugWiring/Power: This unit is equipped with 5 feet of power supply leading to an encapsulated, Class 1 Division 1 explosion proof step down transformer. There is 25 feet of 16/3 SOOW cable coming out of the inline transformer, and is terminated in an explosion proof cord cap. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. Both the line-in and line-out cables of the transformer are terminated via EYM seal offs with Kellum style cord grips to prevent the cable from being pulled out while in the field. The transformer enclosure features a chain carry handle for easy mobility. This inline power supply for this explosion proof drop light is an auto sensing universal voltage transformer that operates on any voltage within the 120-240 volts AC 50/60Hz range. This unit allows operators to power the incandescent light from any 120V AC power source, and steps down AC voltage to 12V DC. The explosion proof power converter features an IP67 rated waterproof cast aluminum housing, making it suitable for indoor or outdoor use and includes integral short circuit and overload protection that will shut down the unit in case of faults and overloads to protect the unit and connected equipment from damage.Versatility: The HAL-7W-LED-25C-X12V-5C-EPP is ETL approved for Class 1 Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof rating ensuring protection against ingress from oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with hazardous location classification where wet conditions are commonly encountered.