Larson Electronics Class I Division 2 LED Stack Light - Day/Night Sensor - Lamp Changes from Day to Night

Made in the USA The HAL-TL-2X10W-1LO-C-DNS Class 1, Division 2 Chemical Resistant LED Light from Larson Electronics is chemical resistant and approved for use in wet locations and marine environments. This waterproof LED light is equipped with two LED lamps and a day/night photocell. One lamp is illuminated during daylight, and the secondary lamp is illuminated during night. The powerful and durable HAL-TL-2X10W-1LO-C-DNS explosion proof LED light from Larson Electronics is an ideal indicator lighting solution for for industrial applications where hazardous materials may be present. The LED lamps carry a 50,000 hour operational life and and are available in 120, 208-277V AC, 12V DC or 24V DC configurations for high or low voltage operation Equipped with an internal photocell and automatic relay, this stack light only operates one light at a time. During daytime operation, one lamp is illuminated. When ambiant light levels fall below a set level (adjustable via the photocell), the daytime lamp powers down and the secondary lamp is illuminiated for nighttime operations. The switch between lamps is automatic. This hazardous area LED light carries has a -29C to 40C (-29F to 104F) operating temp range. The HAL-TL-2X10W-1LO-C-DNS is Class 1, Division 2 approved, carries UL 1570/1571 and UL 595 compliance, and is waterproof and suitable for spray down areas and marine locations. Flying leads allow operators to connect power to the stack light. This LED light carries UL and CSA certification, USCG acceptance, NTRL Listing for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas. This explosion proof fixture is configured for red and green output (one lamp each color) by default. Additional color configuration available, including reb and white, red and blue, blue and amber, and blue and white. Additional customer configurations available upon request. These high output LED lamps offer exceptional lumen output, a 50,000+ hour life span, and the lamps are protected by Pyrex globes and polycarboate globe guards. The LED lamps in this traffic light are 10 watts each and offer cool operation and clean bright output that surpasses that of 100 watt incandescent indicator lamps. The HAL-TL-2X10W-1LO-C-DNS is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal, and is ideal for locations where these hazardous compounds are commonly encountered. Mounting is provided by a heavy gauge aluminum base with four predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment. Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations. Voltages: 120V, 208-277V AC, 12V DC or 24V DC Specifications / Additional Information HAL-TL-2X10W-1LO-C-DNS Ratings/Approvals Lamp Type: LED United States & Canada Lamp Colors: Red/Green, Red/White, Red/Blue, Blue/Amber, Blue/White Class 1,Division 2 Groups A,B,C,D Watts: 10 Watts Per Lamp - 20W Total UL Listed to CSA 22.2-137 Voltage: 120V, 208-277V, 12V DC or 24V DC Class 1,Division 2 Groups A,B,C,D Lighting Configuration: Strobe light or Steady Burn UL 844: Class1 Division 2 Hazardous Location Lamp Life: 50,000+ Hours UL 595: Outside Marine Wiring Hub: 3/4" NPT UL 1570/1571: Wet Locations Mount: PredrilledAluminum Base NEMA 4X Mounting: Ceiling, Wall, Flat Surface -29C to 40C (-29F to 104F) Op Temp USCG Accepted Material meets UL 94-V-0 standards for flame retardancy Special Orders- Requirements Contact us for special requirements Toll Free: 1-800-369-6671 Fax: 1-903-498-3364 E-mail:info@lightingandsupplies.comScroll Down to Purchase