Larson Electronics Class I Div 2 Pivoting Light - 4 Foot 3 Lamp - Offshore Fluorescent Rig Light - Meets USCG Specs

Made in the USAThe Larson Electronics HAL-48-3L-BMSW Hazardous Area Fluorescent Light Fixture is NRTL Listed for United States and Canada Class I Division 2 Groups A, B, C and D - NRTL Certified to UL 1598A listed, has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. This hazardous location light carries a United States Coast Guard approval, making it ideal for applications such as oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers.This four foot long, three lamp fluorescent fixture is ideal for operators seeking a top quality hazardous location light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. This fixture is T4A temperature rated and comes standard with 54 watt T5HO lamps producing a combined total of 15,000 lumens. We also offer T8 or T12HO lamps as alternatives. The lamps are protected by a powder coated aluminum frame and shatter and heat resistant clear acrylic lens secured with ten zinc coated steel draw latches.This fixture carries a T4A temperature rating and is NRTL Certified to UL 595 and UL 1598A Marine Type listed for use in marine environments. The fixture is constructed of copper free sheet aluminum and powder coated. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. The HAL-48-3L-BMSW is weatherproof and provides operators in hazardous locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. Click here to read the NEC description for explosion proof and hazardous locations.Click here to see the new HAL-48-2L-ITG-LED-BMSW Class I Division 2 integrated LED fixture producing 19,200 lumens.Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeEnergy Consumption ComparisonT5HO T8 LEDWattage 162 watts 96 watts 84 wattsAmp Draw @ 120V AC 1.35 amps 0.8 amps 0.7 ampsAmp Draw @ 220V AC 0.74 amps 0.44 amps 0.38 ampsAmp Draw @ 240V AC 0.68 amps 0.4 amps 0.35 ampsAmp Draw @ 277V AC 0.59 amps 0.35 amps 0.3 ampsAmp Draw @ 12V DC 13.5 amps 8.00 amps 7.0 ampsAmp Draw @ 24V DC 6.75 amps 4.00 amps 3.5 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursColor Temperature 5000K / 4100K 4100K 5600KOperation cost per year(12hs/day @ 12c/kWh) $85.15 $50.47 $44.15Mounting Options:Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Standard Surface Mount Brackets:Each L bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two bolts on either side of the bracket. The bolts act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be pivoted by loosening the that hold the bracket to the mounting peg. This fixture allows 45¡ of pivot from the 90¡ point.Suggested Applications: Aircraft maintenance, oil drilling rigs, refineries, marine and salt water environments, ships, tankers, offshore, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants.Made in USA Quality Lamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed streamlined ribbed corrosion-resistant, copper free sheet aluminum body for better hear dissipation and extended ballast life.4. Aluminum lens frame for greater strength5. Re-lamping done via 10 draw latches, which enable the operator to unlatch the lens and access the lamps.5. Heavy gauge aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. 1/2" or 3/4", threaded access hole for wiring conduit.7. Units can be wired end to end in series. F54-T5/850/HO – 54 Watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin colorF54-T5/841/HO – 54 Watt, 5000 lumens per bulb, 20,000 hours life, 4100 Kelvin colorF48-T12/HO – 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color F32-T8/850– 2950 lumens per bulb, 24,000 hours life, 5000 Kelvin colorF32-T8/841– 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color Specifications / Additional Information HAL-48-3L-BMSW Hazardous Area Ratings/ApprovalsNRTL Listed for United States & Canada Class I Division 2, Groups A, B, C & DDimensions: 51.1"-L x 7.09"-W x 8.65"-H NRTL Certified to UL 844Weight: 27 Lbs NRTL Certified to UL 1598A Marine TypeVoltage: Universal 120-277VAC 50/60 Hz Listed for CanadaTotal Watts: 162W (T5HO, 92W (T8), 180W (T12HO) T4 Temperature RatingTotal Lumens: 15,000 (T5HO), 8,850 (T8), 12,150 (T12HO) Meets USCG SpecsLamp Life Expectancy (Hrs): 20,000 (T5HO), 24,000 (T8), 12,000 (T12HO) California Title 24 CompliantLuminous Efficiency (Lm/W): 95.59 (T5HO), 92.19 (T8), 67.5 (T12HO) Operating Temp Range: T4A rated -40¡C to +65¡C Beam Angle: 150¡ Color Temp: 5000K or 4000K Color Temp: CRI >75 Mounting: Back Mount Swivel Bracket Special Orders- RequirementsWiring Hub: 1/2" or 3/4" threaded Contact us for special requirementsMaterials: Sheet aluminum housing, acrylic lens Toll Free: 1-800-369-6671Intl: 1-903-270-1187? E-mail:[email protected]*Lamp wattage may vary depending on lamp choice selected