Larson Electronics Class 1, Division 2 Chemical Resistant Incandescent Light - 150 Watts - Non-Metallic

Made in the USA The HAL-CRNM-150W Class 1, Division 2 Chemical Resistant Incandescent Light from Larson Electronics is UL rated Class 1 Division 2, and designed with a non-metal housing for resistance to chemicals and corrosion. This waterproof fluorescent bulb equipped light is pendant, ceiling, or wall mounted, and available in 120-240 VAC voltage configurations. The powerful and durable HAL-CRNM-150W explosion proof light from Larson Electronics is ideal for industrial applications, hazardous work spaces, and areas where gases and vapors may be present and a reliable and durable general purpose incandescent light solution is needed. The lamp housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globe, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This unit is fitted with a 150 watt incandescent lamp for long life, efficiency, and cool operation and is available in 120-220- 240 VAC and 12/24 VDC configurations for operation with standard and low voltages. This hazardous area light carries a T2D temperature rating and has a -29C to 40C (-29F to 104F) operating temp range. The HAL-CRNM-150W carries UL 1570/1571 and UL 595 compliance and is waterproof and suitable for spray down areas and marine locations. Wiring is through 3/4" NPT hubs. This light carries UL and CSA certification, USCG acceptance, UL 1570/1571 approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas. The 150 watt incandescent lamp in this unit offers high output, and is protected by a Pyrex globe and polycarboate globe guard. We also offer this fixture fitted with compact fluorescent and LED bulbs for higher efficiency and longer life than incandescent bulbs. The unit shown is ceiling mount, and we offer pendant and wall mount versions as well for added installation versatility. The HAL-CRNM-150W is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal and is ideal for locations where these hazardous compounds are commonly encountered. Voltages: 120-240VAC 50/60Hz - 12/24 VDC. Wiring is through 3/4" NPT hubs. Temp Code: Class 1 T2D 215¡F (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere). Specifications / Additional Information HAL-CRNM-150W Ratings/Approvals Lamp Type: Incandescent Class 1,Division 2 Groups A,B,C,D Lamp Dimensions: 5.94" OD , 9.60" Height (Ceiling Mount) UL 1570 Lamp Weight: 3 lbs UL 595: Marine Outside Type Lamp Watts: 150 Watts UL 844: Class1 Division 2 Hazardous Location Lumens: Approx: 2250 UL Listed to CSA 22.2-137 Lighting Configuration: Steady Burn NEMA 4X Lamp Life: Approx 1,000 Hours USCG Accepted Voltage: 120 Volts 60hz AC, 240 Volts AC, 12/24 VDC CSA Certified Mounting: Ceiling, Wall, Pendant New York City Department of Buildings Approved Wiring Hub: 3/4" NPT Material meets UL 94-V-0 standards for flame retardancy Temp Rating: T2D UL for Safety for Supplemental Requirements for Luminaires for Installation on Marine Vessels Ambient Temp Rating: -40¡C to +85¡C Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Down to Purchase