Made in TexasThe EPSLED-80-SOL-80C-C1D2-20C Solar Powered Explosion Proof LED Strobe Light from Larson Electronics is a reliable lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This 7-watt strobe lamp offers 360 degrees of illumination and is protected by a cage guard. Charged by a Class I, Division 2 solar panel, four 12V AC 18aH sealed lead acid batteries provide constant, reliable power to the LED strobe light.The EPSLED-80-SOL-80C-C1D2-20C is a sustainable LED strobe lighting solution for hazardous locations and remote sites. This explosion proof 7-watt lamp operates on 12V DC and features a strobing flash lighting configuration, at a rate of 4 strobe counts per second. Charged by the Class I, Division 2 rated solar panel, four 12V AC 18aH sealed lead acid batteries provide constant, reliable power. The batteries, 24V Class I, Division 2 charge controller and battery disconnect are contained within a NEMA 4X remote enclosure and must be installed within a Class I, Division 2 environment. A 20` photovollic cable between the enclosure and light fixture allows for easy mounting of the panel and control box.Click Photo to EnlargeThe control box is equipped with either a day/night sensor and motion sensor or with an on/off switch. The day/night and motion sensor is programmed to activate the solar panel in the evening and shut it off during the day, while the motion sensor will activate the panel upon detecting movement. The on/off switch will activate and shut off the solar panel according to the operator`s preference. Operators can switch between modes with a toggle switch.This solar-powered LED strobe light is constructed of cast aluminum with a polyester powder coated finish. The IP67-rated unit comes with a T3C temperature rating. Designed for extreme work sites, the LED strobe lamp is UL tested to withstand 1,490 lbs.LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. Solid state LED lighting is also safer for the environment as LEDs are 100% recyclable. And recycling simultaneously reduces operating costs by eliminating the need for the expensive special disposal services required with traditional gas burning and arc type lamps.Power/Wiring: This EPSLED-80-SOL-80C-C1D2-20C is powered by four 12V AC 18aH sealed lead acid batteries that are recharged by the solar panel. These rechargeable batteries provide a continuous supply of steady, reliable power. The lead acid battery pack is contained within the solar panel, not the light. This fixture ships with 80 feet of 10/2 SOOW cord that connects the explosion proof strobe light to the solar panel. Custom lengths are available upon request. Please contact us for special requirements.Charging time for the battery bank is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. Indirect sunlight and low ambient light levels, such as on cloudy days, will extend the charge time.Mounting: The EPSLED-80-SOL-80C-C1D2-20C features an inverted pendant mount for compatible surfaces, walls or ceilings. This mounting configuration ensures maximum visibility of the explosion proof LED strobe fixture. Other available mounting options includ ceiling and wall mounts. Please choose mount style at check out.NOTE: Larson Electronics has further upgraded the options available with this light. We expect the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight (not in the hazardous area) while the light is mounted in a hazardous area workspace. Standard installation for explosion proof lighting, including threaded rigid pipe to the LED light fixture and appropriate seal-offs, etc. are required.Suggested Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, remote locations and more.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPSLED-80-SOL-80C-C1D2-20C Explosion Proof Solar Powered LED Strobe Lamp Ratings/ApprovalsListing: United States & Canada Class I, Div 1 & 2 Groups C, DLamp Type: Solar LED Class II, Div 1 & 2 Groups E, FLamp Dimensions: 7.25" -W x 15" -H Class III, Div 1 & 2Solar Panel Dimensions: 11-3/8"L x 15-3/4"D UL 844Weight: 9 lbs (Strobe Only) UL 1598 Marine TypeVoltage: 12V DC UL 595 Outdoor Marine Type (Saltwater)Battery: (4) 18aH Sealed Lead Acid Batteries UL Certified - U.S./Canadian Safety StandardsRuntime: - IP67 StrobeCharging Time: 5 Hours NEMA 4XTotal Watts: 7W Candela: 1,235 LED Lamp Life Expectancy: 50,000+ Hours Beam Angle: 360¡ Lighting Configuration: Strobing Flash Strobe Count: 4 per Second Operating Temp Rating: T3C Housing Material: Cast Aluminum Special Orders- RequirementsFinish: Polyester Powder Coating Contact us for special requirementsMounting: Inverted Pendant, Ceiling or Wall Toll Free: 888-325-4448Wiring: 80` 10/2 SOOW Cord Intl: 1-903-270-1187Light Color Options: Red, Green, Blue, Amber or White E-mail: [email protected]
Larson Electronics C1D1 Solar Powered Explosion Proof LED Strobe Light - 80' Cord - C1D2 Panel
Larson Electronics
- SKU:
- EPSLED-80-SOL-80C-C1D2-20C
- Weight:
- 0.00 LBS