Larson Electronics C1D1 Dual Emergency Exit Lighting System - 90 Minutes - Explosion Proof Bug Eyes Exit Sign - 120/277

Made in the USA The EXP-EMG-EXT-12W-3L-1XRH-7X7 Explosion Proof Emergency Light with back up emergency battery and exit sign from Larson Electronics is rated Class I Division 1 Class II Division I & II and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability is a must. The EXP-EMG-EXT-12W-3L-1XRH-7X7 is an ideal solution for operators who wish to ensure their hazardous workspaces employ the most effective and reliable safety lighting options available. Under normal conditions this emergency lamp uses normal external power to illuminate its three 10 watt LED lamps. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for 90 minutes or until power is restored. Once power is restored a built in charger will return the unit to a fully charged state within acceptable UL time limits. The EXP-EMG-EXT-12W-3L-1XRH-7X7 explosion proof emergency light features two exit lamp heads. The additional lamps head is connected to the main assembly via rigid conduit. The extra exit lamp head on this explosion proof emergency light with back up emergency battery is mounted 7 feet out to the side and then 7 feet down from there. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This explosion proof emergency exit lighting fixture carries an integral maintenance-free, sealed, high temperature Nickel-Cadmium battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the LED bulbs for 90 minutes. The battery is protected from deep discharge by solid state circuitry which senses low voltage and turns off the unit before battery damage can occur. This emergency exit light is multi-voltage capable and can operate with voltages ranging from 120V to 277V@ 50/60HZ. This unit`s housing and LED light fixtures are constructed of copper-free aluminum that is epoxy powder coat finished to protect the aluminum surfaces. The EXP-EMG-EXT-12W-3L-1XRH-7X7 can withstand temperature variances ranging from 0¡C to 40¡C and its low maintenance design offers up to ten years of operational life. An integrated pilot light indicates the presence of AC current and a test switch allows easy confirmation of proper emergency operation. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in the USA Quality 1. No Maintenance Nickel-Cadmium Battery.2. Copper Free Aluminum Alloy Construction.3. Universal 120 through 277V AC Operation 4. 90 Minute Battery Backup Runtime.5. Deep Discharge Battery Protection.6. 1/2" NPT Conduit Hub.7. Epoxy Powder Coat Finish.8. 10 Year Rated Lifespan.9. Fully Automatic Operation.10. Solid State Internal Electronics.11. Pilot Light AC Current Indicator.12. Test Switch for Emergency Operation Confirmation.13. Fully Electronic Circuit Control. Specifications / Additional Information EXP-EMG-EXT-12W-3L-1XRH-7X7 U.L Ratings Lamp Type: LED Class I Division I & II, Groups C & D Dimensions: 28.67"-H, 33.50"-W Class II Division I & II, Groups E,F,G Watts: 30 Class III Materials: Copper Free Aluminum Housing IP67 Waterproof Rating Voltage: 120/277V AC UL 844 Lighting Configuration: Dual 6 Watt LED Bulbs UL 924T3C Temperature Rating Mounting: Wall Mount/Flat Surface Mount NFPA101 (Life Safety Code) Wiring: 1/2" NPT Threaded for Conduit U.L. Listing: U.S. Explosion Proof Battery Backup: High Temp Nickel-Cadmium Special Orders- Requirements Battery Input Voltage: (Dual) 120/277V AC @ 60Hz Contact us for special requirements Unit Life Expectancy: 10 years Battery Backup Runtime: 90 Minutes Toll Free: 888-325-4448 Battery Output Voltage: 12V DC Nominal Battery Output Current: 1000mA (Constant) E-mail: [email protected] Battery Output Power: 12 Watts (Max) Battery Operating Temp: 0 - 50C Battery Recharge Time: 24 hours from full discharge