The GAU-EMG-2X5W-LED-WP from Larson Electronics is a Bug Eye Emergency LED Fixture that is suitable for wet locations. The GAU-EMG-2X5W-LED-WP contains fully adjustable, dual LED light heads and will operate for at least 90 minutes in the event of a power failure or outage. This 120/277V unit contains an external momentary push-to-test switch and has a 24-hour battery recharge time following emergency operation. The GAU-EMG-2X5W-LED-WP bug eye LED fixture is ideal for installation in rugged work sites and wet locations that require emergency illumination in the event of a power failure or power outage. This fixture features dual LED light heads that are configured in a bug eye layout and a 90-minute emergency backup feature. Light Features: The GAU-EMG-2X5W-LED-WP features two LED lamps that each contain 12 high-output LEDs. This emergency LED fixture features over voltage/surge protection and has a low voltage disconnect which prevents damage to the battery caused by a deep discharge. This push-to-test LED fixture will run for at least 90 minutes after a power failure thanks to the maintenance-free 3.6 volt NiCad battery. After emergency use, the battery takes 24 hours to completely recharge. Suitable for wet locations, the bug eye system is protected by an injection-molded, impact resistant V-0 flame retardant themoplastic housing and a polycarbonate lens. The fully gasketed unit features solid state circuitry. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Emergency Operation: The GAU-EMG-2X5W-LED-WP features a backup battery that will run the fixture for at least 90 minutes following a power outage or any other loss of power. The included emergency backup battery is a 3.6 volt NiCad rechargeable unit. The 900 mAh power cell is maintenance-free and capable of operating in a wide variety of conditions including in temperatures ranging from 50¡F to +104¡F. This unit also features a low voltage disconnect. This means that if the fixture detects that the battery`s terminal voltage has fallen below a certain level, the low voltage circuit will disconnect the emergency lighting load until normal power is restored. This prevents the battery from experiencing a deep discharge and becoming damaged. Mounting: The GAU-EMG-2X5W-LED-WP is designed to be wall, ceiling or surface mounted to flat surfaces. A universal, included mounting plate ensures secure installations. The LED light heads are fully adjustable and can be positioned after installing the LED emergency light. Suggested Applications: The GAU-EMG-2X5W-LED-WP is ideal for use as emergency lighting in areas where a wet-location fixture is required. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information GAU-EMG-2X5W-LED-WP Bug Eye Emergency LED Fixture Ratings Lamp Type: LED Suitable for Wet Locations Dimensions: 13.25" x 5.375" x 5.75" V-0 Flame Retardant Housing Weight: 4 lbs Push-to-Test Switch Voltage: 120/277V AC 90 Minute Emergency Runtime Total Watts: 10 Fully Adjustable LED Light Heads LED Configuration: (2) LED Light Heads Low Voltage Disconnect LED Light Color: White Overload Protection LED Life Expectancy: 50,000+ Hours Emergency Runtime: 90 Minutes Battery: 3.6V 900 mAh NiCad Rechargeable Battery (Maintenance-free) Battery Recharge Time: 24 Hours Special Orders- Requirements Ambient Operating Temp: 50¡F (10¡C) to 104¡F (40¡C) Contact us for special requirements Materials: Thermoplastic, Polycarbonate Phone: 1-214-616-6180 Mounting: Surface, Wall or Ceiling Mount Toll Free: 1-800-369-6671 Push-to-Test: External, Sealed, Momentary Fax: 1-903-498-3364 Color: White E-mail:[email protected] Down to Purchase-
Larson Electronics Bug Eye Emergency LED Fixture - 120/277V - (2) LED Lamps, 90-min Battery Backup - Wet Locations
Larson Electronics
- SKU:
- GAU-EMG-2X5W-LED-WP
- Weight:
- 0.00 LBS