Larson Electronics 84W Hazardous Location LED Light - C1D2 - Meets Corrosion Resistant Requirements - 0-10V Dimming

Made in the USAThe Larson Electronics HALP-48-3L-LED-D-V2 Hazardous Area LED Light Fixture is U.S./Canada approved Class I Division 2 Groups A, B, C and D, UL 1598A listed, and is specifically designed to handle the rigors of wet and corrosive marine environments. This hazardous location LED light has a T4 temperature rating and carries a United States Coast Guard approval, making it ideal for applications such as oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers.This four foot, three lamp 0-10V dimming LED fixture is ideal for operators seeking a top quality hazardous location light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The HALP-48-3L-LED-D-V2 hazardous area LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class I Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Eight plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications.We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light`s performance. This three lamp HAZLOC LED linear fixture is lighter in weight and produces more light than hazardous location fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs. The HALP-48-3L-LED-D-V2 is UL 844 rated and Class I Division 2, Groups A, B, C, D approved. This 0-10V dimmable fixture also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This lamp offers the extreme durability, high efficiency and long lamp life of high power LEDs in a proven hazardous location fixture design, making it a reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. Click here to read the NEC description for explosion proof and hazardous locations. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified. The 0-10V dimming capabilities of the HALP-48-3L-LED-D-V2 offers energy savings and easy brightness control.LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 10,500 total lumen light output. An HALP-48-3L-T8 hazardous location fluorescent light, with a combined total of 96 watts, draws 0.8 amps at 120 volts AC. This LED version of the same light, with a total of 84 watts, draws only 0.7 amps at 120 volts AC. This results in a lower amp draw while still providing increased reliability and light output.The HALP-48-3L-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. This includes commonly found voltages such as 120V 60Hz, 220V 50Hz, 240V 60Hz, and 277V 60Hz. Energy Consumption ComparisonT5HOT8LEDWattage162 watts96 watts84 wattsAmp Draw @ 120V AC1.35 amps0.80 amps0.70 ampsAmp Draw @ 220V AC0.74 amps0.44 amps0.38 ampsAmp Draw @ 240V AC0.68 amps0.40 amps0.35 ampsAmp Draw @ 277V AC0.59 amps0.35 amps0.30 ampsAmp Draw @ 12V DC13.50 amps8.00 amps7.00 ampsAmp Draw @ 24V DC6.75 amps4.00 amps3.50 ampsLamp Life Expectancy20,000 hours24,000 hours 50,000 hoursOperation cost per year(12hs/day @ 12c/kWh)$85.15$50.47$44.15Mounting Options: Unless otherwise specified, our standard, most popular configuration is the flange mount shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations. Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 38.25" on center apart along the top of this hazardous location light. The mounting holes are 7.2" on center across the top of the light. Standard Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with either two 1/2" or 3/4" NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to one of the NPT hubs and tied in to the fixture’s lead wires, completing the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture. Suggested Applications: The HALP-48-3L-LED-D-V2 is designed for marine, wet, damp locations where corrosion resistant fluorescent lights are required or are already present. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs.Made in USA QualitySuperior LED Benefits1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. Pendant mount fixtures allow for suspension mounting via rigid conduit.3. Fixture housing constructed of glass fiber reinforced polyester.4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.5. Re-lamping done via eight plastic snap locking latches which enables the operator to remove the door and access the lamps.6. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection.7. 1/2" or 3/4", threaded access hole for wiring conduit.8. Both surface or pendant mount units can be wired end to end in series.9. 0-10V dimming capabilities offers energy savings and brightness control.1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing.11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information HALP-48-3L-LED-D-V2 Hazardous Area Dimmable LED Offshore LightRatings/ApprovalsListing: United States - CanadaListed for United States and CanadaSurface Mount Dimensions: 48.98"L x 7.98"W x 5.1"HClass I, Division 2, Groups A, B, C, DPendant Mount Dimensions: 48.98"L x 7.21"W x 5.43"HClass II, Division 2, Groups F, G Weight: 14.28 Lbs UL 844Voltage: Universal 120-277VAC 50/60 HzUL 1598A Marine Type (Saltwater)Total Watts: 84 watts (28 Watts per Lamp)Certified to Canadian StandardsTotal Lumens: 10,500 (3,500 per Lamp) Meets USCG SpecificationsLuminous Efficacy: 125 Lumens per WattCalifornia Title 24 CompliantLamp Life Expectancy: 50,000 HoursT4 Temperature RatingColor Temp: 5600K, 4500K or 3000KLEL Listed LED LampsColor Rendering Index: >80Silicone FreeBeam Angle: 150¡0-10V Dimming CapabilitiesLighting Configuration: Flood PatternMade in the USAPower Efficiency: 90%Power Factor: >0.95Ambient Operating Temp Range: -40¡C to +65¡COperating Temp Rating: T4 RatedMinimum Operating Temp: -30¡CMaximum Case Temp: +90¡CHousing Material: Fiberglass Reinforced Polyester HousingLens Material: Shatter/Impact Resistant Acrylic DiffuserGasket Material: NeopreneSpecial Orders- RequirementsMounting: Flange Type Surface Mount or Pendant MountContact us for special requirementsWiring Hub:1/2" or 3/4" NPTToll Free: 1-800-369-6671 Intl: 1-903-270-1187U.L Approval: U.S Certificate Canada CertificateE-mail: [email protected]