Larson Electronics 8,000 Watt Generator - Water Cooled Diesel Engine - 30' Telescoping Tower - 6 Metal Halide Fixtures

Made in the USA The WCDE-6MHL mobile light tower from Larson Electronics is a towable lighting package powered by a water cooled diesel engine turning a single bearing 4 pole generator which produces 11,000 watts and 120/240V@60Hz. With six 1,000 watt metal halide lamps producing 660,000 lumens this unit will illuminate a 5-7 acre area continuously without refueling for up to 45 hours. The WCDE-6MHL mobile light tower is a self contained towable light tower package that produces enough light to illuminate an area up to 7 acres in size. This unit contains a water cooled diesel engine powering a 11,000 watt generator, which supplies the current for six 1,000 watt metal halide lamps producing 110,000 lumens each, for a combined total of 660,000 lumens of light. This unit can run uninterrupted for up to 45 hours straight without refueling and includes a telescoping light mast which can elevate the six metal halide lamps to a height of 30 feet. This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed. Genset: The WCDE-6MHL mobile light tower includes a Kubota Lowboy II GL11000TM genset that houses a Kubota D722 diesel engine that powers the 11KW 120/240V brushless generator. This genset is liquid cooled and features a single phase generator with electric start ignition. The diesel generator runs at 3600 RPM and is equipped with an EPA/CARB Tier 4 emissions system. A 100 gallon fuel cell sits beside the genset and is equipped with an electric fuel delivery system. The fuel cell is constructed of single a heavy gauge steel single wall frame with internal anti-splash baffles. This genset features key operated electric starting, a twelve volt electrical system, liquid cooling, replaceable dry element air cleaner, and a full enclosure for safe operation and protection against the elements. This engine also features cold weather options to improve performance under cold weather conditions. Lights: The lighting system on this unit is comprised of six 1,000 watt metal halide lamps producing 110,000 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern capable of illuminating a minimum of 5 acres with a combined total of 660,000 lumens of light. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. Telescoping Boom: The telescoping boom consists of three sections extending up to 30 feet through the use of two manual self braking winches and allows for rotating the lights 360 degrees. The telescoping boom is constructed of powder coated steel to resist rusting and corrosion and comes powder coated to prevent friction and rusting between tower sections. This system is capable of withstanding 65 mph winds when extended to its full height and the stabilizing outriggers are deployed. The stabilizing outriggers are a three point design with one located under the trailer tongue and two on the rear sides of the unit. The two rear outriggers are adjustable and include 1500 lbs, swivel jacks for leveling and stabilizing the tower. Wiring/Controls: Each light head is wired into the NEMA 3R breaker control box at the base of the mast. Operators control the light heads via an on/off switched breaker per individual light head. Trailer: The entire unit is mounted onto a two wheel trailer with a 3,500 lbs leaf spring axle and 15” wheels with protected fenders. A standard two inch ball coupling and two standard safety chains allow for easy hookup and towing. The entire unit can be loaded and unloaded onto trucks via forklift sleeves mounted to the outer section of the light mast. Specifications / Additional Information WCDE-6MHL Mobile Light Tower Protection Genset Specs: 11KW Kubota Brushless Genset Genset: Kubota GL11000TM 100 Gallon External Fuel Cell Engine: Kubota D722 16.3 HP Glow Plugs Factory Installed Engine Type: Vertical, liquid-cooled, 4-cycle diesel engine Up to 45 Hour Continuous Operation Engine Speed: 3600 RPM 11.5` to 30` Light Mast No. of Cylinders: 3 Steel Construction Trailer Generator: 11KW 2-Pole Brushless Large Area Coverage Voltage: 120/240V Single Phase 660,000 Total Lumen Output Battery 12V @ 36aH Independently Adjustable Light Heads Fuel Cell Capacity: 100 Gallons - External Tank w/ Anti-Splash Baffles Dial-in Adjustability per light head Fuel Delivery: Electric IP67 Waterproof MH Fixtures Sound Level: 68 dB - Full load @ 23` away All Equipment Mounted on a 14` x 8` Trailer Cold Weather Package: Glow Plug Factory Included Steel Trailer w/ Industrial Grade Paint Finish External Grounding Light Mast Specs Towable Height Under 13` w/ Light Heads Tower Length: 11.5` to 30` 4-Point Outrigger System Lamp Qty: (6) Withstands 65Mph Winds at Full Extension Materials: Tube Steel Finish: Powder Coated Operation: (2) Manual Crank Winches Light Head Specs Lamp Type: Metal Halide Total Wattage: 6,000W (1,000W per lamp) Total Lumens: 660,000 (110,000 per lamp) Efficiency: 110 Lumens per Watt Lighting Configuration: Flood Beam Pattern - NEMA 5X5 Run Time: Up To 45 Hours on Single Tank of Fuel Trailer Specs Materials: Steel Trailer Dimensions: 14`-L x 8`-W trailer bed Special Orders- Requirements Hitch: 2" Ball Hitch Contact us for special requirements Wiring: 7-Pin Flat Toll Free: 888-325-4448 Axles: 3,500 lbs Leaf Springs Outriggers: (4) Retractable Outriggers - 1500lb jacks E-mail: [email protected] 3 year warranty replacement on this light mast. The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit. Scroll Down to Purchase