Larson Electronics 75KVA Temporary Power Distribution - 480V to 208Y/120V 3PH - (8) CS8269 (2) 520R-GFCI Receptacles

Made in Texas The Larson Electronics MPD-480D-75KVA-208Y.120-8X50A.208-2X20A.120 power distribution substation converts three-phase 480VAC electrical current into three-phase 208Y/120VAC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-480D-75KVA-208Y.120-8X50A.208-2X20A.120 portable power distribution system gives operators the ability to power their 208 volt and 120 volt equipment from a single system. On the primary side, operators connect three-phase 480V line-in power via a customer-provided cord. On the secondary side, operators connect to eight CS8269 receptacles for 208V equipment and to two 5-20R GFCI receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: A customer provided line-in cord brings 480V three phase power to a NEMA 3R 100-amp, 480V three-phase primary disconnect, which contains three 100-amp time delay fuses, and passes power to the transformer. The NEMA 3R 75KVA transformer converts 480V three phase power to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 225-amp, 208Y/120V three phase main circuit breaker panel. This secondary panel contains eight 50-amp, 2-pole, 250V breakers protecting eight 50-amp, 250V, CS8269 receptacles, and two 20-amp, 125V breakers protecting two 125V, 20-amp 5-20R GFCI duplex receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this powder coated white unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480D-75KVA-208Y.120-8X50A.208-2X20A.120 Power Transformer Ratings Line-In Cord: Customer Provided Cord Max OCP Primary: 100A @ 480V Primary Voltage: 480VAC 3PH Max PDU OCP: 100A @ 480V Primary Disconnect: 480V 3PH 100A N3R Fused @ 100A Max OCP Secondary: 225A @ 208V Primary Protection: Time Delay Fuses Max Secondary Output: 208.2A @ 208V Transformer: 75KVA 480V to 208Y/120V 3PH 60 Hz N3R UL 1640 Portable Power-Distribution Equipment Secondary Voltage: 208Y/120VAC 3PH Made in the USA Secondary Panel: 208Y/120V 3PH 225a MCB N3R Secondary Breakers: (8) 50A 2P [250V] (2) 20A [125V] Secondary Receptacles: (8) 50A CS8269 [250V] (2) 20A 5-20R GFCI Duplex [125V] Secondary Protection: Circuit Breaker,GFCI, Weatherproof Covers Special Orders- Requirements Form Factor: Square tube frame w/ 1/8" side walls, hinged access doors, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder coated steel frame Phone: 1-214-616-6180 Dimensions: 48” X 44” X 60” Toll Free: 888-325-4448 Weight: 550 pounds Fax: 1-903-498-3364 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase